7.2.6 Error Messages
There may be occasion when an invalid configuration error might display because the configuration between the Centurion controller and its devices are out of
Field testers may decide to ignore the message, if the user knows that the changes are not critical. The user may direct the error message to be ignored through a setting at the super user (password protected) menu. At CONFIG FAIL DISABLE, the user would select Yes to ignore the data mismatch.
The setting is temporary as once power is cycled on the Display, the error message will continue until comparisons between the devices yield no configuration mismatch.
However, if the user knows of changes that might have resulted from changes made fine tuning in the field and wants to synchronize the data, he may choose to do so and there are a couple of options available.
●A super user could choose to also download the configuration from the super user menu on
●A user who without access to the super user menu could activate the download through the Special Jump Code 35.
C
TM
CONTROLLER COM FAIL!
PRESS SETUP IF COM
PORT SETTINGS NEED
TO BE MODIFIED.
Comm Fail Screen
This screen indicates that the controller is not responding to poll requests. There are only two ways to exit this screen, either by normal responses resuming or if the SETUP/ENTER key is pressed.
This screen will be displayed when a configuration fault is detected.
Possible sources of the fault include a corrupt or missing con- figuration in the display, a corrupt or missing configuration in the controller or a mismatch of configurations in the display and controller.
C
TM
INVALID CONFIGURATION
PRESS SETUP TO ACCESS
DOWNLOAD MENU
Note that this error message does not always indicate a prob- lem, but may only signify that initial comparisons between devices do not match. This screen will appear briefly after configuration downloads and may appear briefly after initial communication is established until comparisons are com- plete.
The fault can be resolved by downloading the proper configu- ration to one or both devices.
