6.3Setup Screens and Menus
6.3.1Password Screen
C
TM
| ENTER PASSWORD |
|
| FOR SETUP MENUS |
|
___________________________________ | ||
| 00000 | ▼ |
▼▲ |
|
|
▼ ▼ |
|
|
|
|
|
Password Screen
C | TM |
|
|
SUPER USER MENU |
|
COM FAIL DISABLE | ▼ |
SETUP T/O DISABLE |
|
CONFIG FAIL DISABLE |
|
RESET FAULT HISTORY |
|
RESET EVENT HISTORY
___________________________________
|
|
| NO | ▼ |
|
___________________________________ |
| ||||
| ▼▲ |
|
|
| |
| ▼ ▼ | MORE MENUS |
|
|
|
|
|
|
| ||
|
| Super User Menu Screen |
| ||
|
| C | TM |
|
|
|
|
|
|
| |
| CONFIRATION DOWNLOAD |
|
|
| |
| COM 1 CONFIG DOWNLOAD |
| ▼ |
| |
| COM 2 CONFIG DOWNLOAD |
|
|
| |
USB CONFIG DOWNLOAD
FIRMWARE DOWNLOAD
___________________________________
NO ▼
___________________________________
▼▲
Download Only Screen
Some settings are password protected, including the setup screens. This is the first screen seen when the SETUP/ENTER key is pressed.
The password need only be entered once during any editing session. The password will reset when the editing session is exited, or is
The cursor begins at the last digit on the right. The user can adjust the value of each digit with the up/down arrows while the left/right arrows are used to select the digit to edit.
Passwords are assigned using the MConfigPro software and each digit can range from zero to nine (except the first digit on the left) for a total range of 00000 to 65535 for the complete password.
The user will not be allowed to increment the selected digit if it would result in exceeding range limits.
There are three separate levels of passwords to accommodate several security needs:
•“Standard” password – Allows access to every feature except the Super User menu. Valid Standard passwords can be zero or any number between 100 and 65535. If the Standard password is set to zero, the result is that anyone can have read/write access to setup menus.
•“Super User” password – Adds the Super User menu to the Standard menus. Valid Super User passwords can be in the range of 100 to 65535. The Super User password can not be the same as the Standard password.
•“Download Only” password – This Special 35 Jump Code allows access to a download menu and is set to a fixed value of 35. This allows a configuration to be downloaded in the event that the current passwords are lost or no initial configuration has been downloaded.
If the Standard password is not zero and a password of all zeroes is entered, the user will have “view only” access.
Inactivity Timeout: Setup procedures must be started and completed in a timely manner. Note that after 3 minutes without activity, the keypad returns the default operational screen and a password must be
