Canon WUX10 Dgamma, This sets the dynamic gamma function to WEAK, Format, Environment, Response

Projector WUX10 MarkII User Commands

DGAMMA

Dynamic gamma

Format

DGAMMA=<Dynamic gamma setting parameter:ID>

GET□DGAMMA / ?△DGAMMA

<Dynamic gamma setting parameter:ID>

OFF	Off
WEAK	Weak
STRONG	Strong

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET DGAMMA' or '?DGAMMA', current dynamic gamma setting is returned as 'g:DGAMMA=<Dynamic gamma setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1)The command is used to set the dynamic gamma function.

(2)This command functions in the same way as when "Image adjustment" - "Advanced adjustment" - "Dynamic gamma" are selected on the menu.

(3)This sets the currently selected input signal and image mode.

(4)The current dynamic gamma function status can be acquired using the applicable GET command. ("GET DGAMMA")

Example

Setting

>	DGAMMA=WEAK	This sets the dynamic gamma function to WEAK.
<	i:OK

Reference

>GET DGAMMA or ?DGAMMA This retrieves the dynamic gamma function state.

< g:DGAMMA=WEAK

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 27 -