Canon WUX10 Ascombo, Auto focusing is executed during auto setup execution, Format, Environment

Projector WUX10 MarkII User Commands

ASCOMBO_*

Defines auto setup combination

Format

ASCOMBO_AF=<Auto set combination parameter:ID>

ASCOMBO_AVK=<Auto set combination parameter:ID>

ASCOMBO_AINP=<Auto set combination parameter:ID>

ASCOMBO_ASC=<Auto set combination parameter:ID>

GET□ASCOMBO_AF / ?￿ASCOMBO_AF

GET□ASCOMBO_AVK / ?￿ASCOMBO_AVK

GET□ASCOMBO_AINP / ?￿ASCOMBO_AINP

GET□ASCOMBO_ASC / ?￿ASCOMBO_ASC

<Auto set combination parameter:ID>

ON	Combine
OFF	Do not combine

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if automatic setup combination was set properly.

For 'GET ASCOMBO_*' or '? ASCOMBO_*', current auto setup sequence combination is returned as 'g:ASCOMBO_*=ON' or

'g:ASCOMBO_*=OFF'

For details on other responses, refer to the "Error List".

Description

(1)This sets whether to combine a sequence in the auto setup.

(2)This command functions in the same way as when "System settings" - "Auto setup" are selected on the menu.

(3)Even if it has been set using this command, AUTOSETEXE may not be executed depending on other status of the projector (screen aspect, etc.).

(4)Also refer to the AUTOSETEXE command.

(5)The current auto setup combination can be obtained using the GET command.

Example

Setting

>	ASCOMBO_AF=ON	Auto focusing is executed during auto setup execution.
<	i:OK

Reference

>GET ASCOMBO_AVK or ?ASCOMBO_AVK Auto focus execution setting in current auto setup is obtained.

< g:ASCOMBO_AVK=ON

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 15 -