Canon WUX10 Response, Transmissionformat, Example, ERR response, An error message is output, Type

Projector WUX10 MarkII User Commands

Response

Transmissions sent from Projector to PC in response to commands from PC.

Transmissionformat

<Response character string> <Delimiter>

<Response character string>

Character strings consisting of one or more ASCII characters. The first two characters are always <one lowercase letter>: The first character indicates the response type.

	Response	Meaning	Example
	type
	i	State response	i:OK i:BUSY etc.
	w	Warning	w:USER_COMMAND..
	e	Error	e:000B INVALID..
	g	Reference command response	g:AVOL=10
<Delimiters>
	Delimiters for commands sent from PC.
Type
OK response		After processing of each command is completed, a response is sent indicating that
		the next command can be received.
		<OK response character string>:=i:OK
BUSY response		This response is sent when a command cannot be received during processing.Wait
		for a few moments, and then try sending the command again.
		<BUSY response character string>:=i:BUSY
	Example:	> IMAGE=STANDARD
		< i:BUSY
WARN response		This response is sent when warning information is issued.

	* that this command cannot be executed.
	<Warning response character string>:= w:<Warning description>
Example:	> IMAGE=STANDARD
	< w:USER_COMMAND_VERSION_IS_UPDATED
ERR response	An error message is output.
	<Error response character string>:= e:<Error code>□<Error message>
	* <Error code> is expressed as a four-digit hexadecimal number.
	* Refer to “Error List”!
Example:	> abcdefg
	< e:0002 INVALID_COMMAND
GET response	Request response for each parameter.
	<GET response character string>:=g<Parameter name>=<Value>
Example:	> GET LANG or ? LANG
	< g:LANG=JPN

Revision History / Date

Changes

Revised by

Approved by

- 5 -