Canon Sharp, Projector WUX10 MarkII User Commands, Format, Environment, Response, Description

Projector WUX10 MarkII User Commands

SHARP

Sharpness setting

Format

SHARP=<Sharpness setting:Number>

GET□SHARP / ?△SHARP

Setting values for <Sharpness setting:Number> are -10 to 10.

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET SHARP' or '?SHARP', current sharpness setting is returned as 'g:SHARP=<Sharpness setting:Number>'

For details on other responses, refer to the "Error List".

Description

(1)This sets the screen sharpness.

(2)This command functions in the same way as when "Image adjustment" - "Sharpness setting" are selected on the menu.

(3)If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(4)This sets the currently selected input signal and image mode.

(5)The current sharpness can be acquired using the applicable GET command. ("GET SHARP")

Example

Setting

>	SHARP=3	This sets the sharpness to 3.
<	i:OK

Reference

>GET SHARP or ?SHARP This retrieves the sharpness.

< g:SHARP=3

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 71 -