Eton 102 owner manual Alarm Functions, SETTING THE CLOCK continued

SOUND 102 OWNER’S MANUAL

SETTING THE CLOCK continued

AUTOMATIC CLOCK SETTING

When power to the set has been interrupted, the clock will be lost. When the automatic mode is on, the set will tune to a DAB signal when the power is restored, and will attempt to automatically update the clock. If the set has been set to CLOCK SETTING ON or there is no available DAB signal with clock information, you will need to set the clock manually, as described above.

ALARM FUNCTIONS

The alarm can be set to wake you by beeping tones (BUZZER mode), or with music or speech from DAB radio, FM radio, or your iPOD. The volume of the alarm will start quietly and gradually increase. In iPOD mode, play will start from the last track played.

Note: if the set is in AUX mode, only BUZZER operation is possible.

SETTING AND ACTIVATING THE ALARM TIME

AND WAKE-UP MODE

To set the alarm, the radio can be in standby mode, or turned on, in DAB, FM or iPOD mode.

Use the buttons on the radio or the remote. Watch the display.

1.Press and hold the ALARM button for about 2 seconds, then release it – ON or OFF flash on the left side of the display.

2.Press the tune buttons to toggle the alarm ON and OFF.

3.Press/release the ENTER/ button – the hour flashes.

4.Press the TUNE buttons to adjust the hour.

10