Eton 102 DAB RECEPTION continued, Auto Tuning, Full Scan, Selecting DAB Services, Auto Enter Mode

SOUND 102 OWNER’S MANUAL

DAB RECEPTION continued

Auto Tuning

Two types of channel scan are available, QUICK SCAN and FULL SCAN. During the scan a list is created of all the DAB services avail- able in your area, and the set will then tune to the first service on the list. The list is in alphabetical order of the station name. Fully extend the antenna before starting the scan.

A short press of AUTOTUNE will start a QUICK SCAN. This will scan the frequencies commonly used in most countries, and can be used to quickly check for new or modified stations. It is much quicker than

FULL SCAN.

A long press of AUTOTUNE will start a FULL SCAN. This will scan all the available frequencies and takes several minutes. After the first power-on, or after a SYSTEM RESET, a FULL SCAN is performed.

Selecting DAB Services

Use the or down buttons on the set or the TUNE – or TUNE + buttons on the remote control to display the list of DAB services available. When the service you want to listen to is displayed, press the ENTER/ button to tune to the service.

Auto Enter Mode

You can change the operation so that the DAB service is tuned automatically by waiting 3 seconds after displaying the service. To turn AUTO ENTER ON, press and hold ENTER/ for 2 seconds. AUTO ENTER ON will be displayed. Use the same procedure to turn AUTO ENTER OFF

Storing into Memory Presets

There are 5 memory presets in DAB mode. Note that the procedures

4