Canon WUX10 Nosig, This sets the “Blue” screen when no signals are input, Format, Environment

Projector WUX10 MarkII User Commands

NOSIG

Display screen when no signal setting

Format

NOSIG=<Parameters for setting display screen in no-signal mode:ID>

GET□NOSIG / ?△NOSIG

<Parameters for setting display screen in no-signal mode:ID>

BLACK	Black screen
BLUE	Blue screen

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET NOSIG' or '?NOSIG', current display screen when no signal setting is returned as

'g:NOSIG=<Parameters for setting display screen in no-signal mode:ID>'

For details on other responses, refer to the "Error List".

Description

(1)This sets the display screen when no image signals are input.

(2)This command functions in the same way as when "Display setting" - "User screen setting" - "Screen when no signal" are selected on the menu.

(3)The GET command can be used to obtain the current display screen at no signal. ("GET NOSIG")

Example

Setting

>	NOSIG=BLUE	This sets the “Blue” screen when no signals are input.
<	i:OK

Reference

>GET NOSIG or ?NOSIG This retrieves the screen when no signals are input.

< g:NOSIG=BLUE

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 53 -