Canon manual This retrieves the color saturation, Projector WUX10 MarkII User Commands, Format

Projector WUX10 MarkII User Commands

SAT

Color saturation setting

Format

RGBGAIN=<R gain setting:Number>▽<G gain setting:Number>▽<B gain setting:Number> GET□RGBGAIN / ?△RGBGAIN

Setting values for <Color saturation setting value:Number> are -20 to 20.

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	O	O	O	O	O	X	O

Response

"i:OK" is returned if the parameter was set properly.

For 'GET SAT' or '?SAT', current saturation setting value is returned as 'g:SAT=<Color saturation setting value:Number>'

For details on other responses, refer to the "Error List".

Description

(1)This sets the screen color saturation.

(2)This command functions in the same way as when "Image adjustment" - "Color adjustment" - "Color saturation setting" are selected on the menu.

(3)If the input is "HDMI", 'e:200X INVALID_SOURCE(***)' is returned as an error response.

(4)When image mode is not set to "PHOTO", 'e:2020 INVALID_IMAGE_MODE' is returned as an error response even if the input is "D-RGB", "A-RGB1" or "A-RGB2".

(5)If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.

(6)This sets the currently selected input signal and image mode.

(7)The GET command can be used to retrieve the current color saturation. ("GET SAT")

Example

Setting		This sets the color saturation to –10.
> SAT=-10
<	i:OK
Reference		This retrieves the color saturation.
>	GET SAT or ?SAT

<g:SAT=1

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 67 -