Canon This retrieves the power management mode, Projector WUX10 MarkII User Commands, Format

Projector WUX10 MarkII User Commands

PMM

Power management

Format

PMM=<Power management setting parameters:ID>

GET□PMM / ?△PMM

<Power management setting parameters:ID>

OFF	OFF
STANDBY	Standby mode
EXIT	Exit mode

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET PMM' or '?PMM', current power management setting is returned as

'g:PMM=<Power management setting parameters:ID>'

For details on other responses, refer to the "Error List".

Description

(1)This sets the power management mode.

(2)This command functions in the same way as when "System setting" - "Power management mode" are selected on the menu.

(3)Power management cannot be set to OFF if ON has been selected as the direct power-on setting (DPON=ON).

("e:1005 DIRECT_POWER_ON" is returned)

(4)The current power management mode can be acquired using the applicable GET command. ("GET PMM")

Example

Setting		This sets the power management to "standby".
> PMM=STANDBY
<	i:OK
Reference		This retrieves the power management mode.
>	GET PMM or ?PMM

<g:PMM=EXIT

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 55 -