13
�Select the corresponding tape length according to
the loaded tape in the time counter mode.
Example) When selecting the 60 minutes as tape
length.
�Each time this button is pressed, the tape
length changes as follows ;
�During playing or recording, the elapsed playing
or recording time is displayed.
�The time counter is not actually a clock, so the
displayed time is not exactly equal to the actual
elapsed time.
Selecting a counter mode Selecting a tape length
�For better sound quality, select the normal
speed dubbing mode.
�During dubbing, the tape is recorded in accor-
dance with the recording condition of the tape to
be played regardless of the Dolby NR mode.
�Because dubbing starts from the front side, if
there is not the erase - protection tap on that
side, dubbing can not be performed.
�During dubbing, only the STOP button of the deck function buttons does work.
�There are two kinds of counter mode : tape
counter, time counter for displaying the elapsed
playing or recording time.
�Select the desired counter mode.
�Each time this button is pressed, the counter
mode changes as follows ;
Open the cassette door by pressing
the EJECT button and load a blank
tape into Deck A and prerecorded
tape into Deck B respectively.
1
To stop dubbing.
3
Start dubbing.
2
�NORMAL : Normal speed
dubbing.
�HIGH : 1.5 times as fast
as normal speed
dubbing.
: Tape counter mode
: Time counter mode
�
DD-6200(G) 2007.3.29 10:23 AM 페이지 13