Sherwood DD-6200 manual Operations

DD-6200(G)2007.3.2910:23AM페이지9

Operations

z

Note : Do not use the metal tapes because these are not played back and recorded correctly.

1 Press the POWER swith to turn the power on.

�Do not turn the power off while operating the unit. In this case, the tape door may not be opened.

Load the tape with the bottom side

2 up and to close the cassette door, push the door gently until it clicks.

�

�Only in the stop mode, the door can be opened. �According to the type of the tape loaded, the cor- responding type is shown by the auto tape selec-

tor as follows (Deck A only) ; “NOR” : Normal tape.

“CR” : Chrome(CrO2) tape.

�For details, refer to “AUTO TAPE SELECTOR” on page 7.

4 Select the desired reverse mode.

�Each time this button is pressed, the reverse mode is selected as follows ;

: Playback of a single side

: Playback of both sides (Front side � Back side)

: Repeat playback of both sides ( � Front side � Back side )

�On the Deck B, the front side can be played back regardless of the reverse mode.

3	In case of the tape recorded with
	mode.Dolby B NR, select the Dolby B NR

�Each time this button is pressed, Dolby B NR or Dolby NR OFF mode is selected as follows;

�
Dolby B NR	: “	” lights up.
�
Dolby NR OFF	: “	” goes off.

5	Start playback.	Front side
	Back side

(Deck A only)

Tape counter	Deck A tape detection
	indicator

L
dB	20	10	6	3	0	3	6
R

Dolby B NR Reverse mode Level meter Playback mode indicator

9