Sherwood DD-6200 - page 13

12
�When this unit is connected to a Sherwood compatible CD player controlled remotely by the DIGI
LINK III system, the CD synchro recording can be performed.
�During CD synchro recording, only the STOP
button of the Deck A function buttons does
work.
��Notes
�Because CD synchro recording starts from the front side, if there is not the erase-protection tap on
that side, CD synchro recording can not be performed.
�During CD synchro recording, if other program source on the amplifier is selected, the unit stops CD
synchro recording and starts recording the selected program source.
�The CD is selected automatically on the amplifier
bearing the DIGI LINK III logo.
�If 8 seconds elapses after starting recording, the
CD player starts automatically.
Do the steps 1, 2 and 3 in
“RECORDING” procedure.
1
To stop recording.
9
According to the tape length, edit the
tracks to be recorded on the CD play-
er referring to the operating instruc-
tions of that.
2
Start CD synchro recording.
3
To stop CD synchro recording.
4
DD-6200(G) 2007.3.29 10:23 AM 페이지 12