Canon Dots, Projector WUX10 MarkII User Commands, Format, Environment, Response, Description

Projector WUX10 MarkII User Commands

DOTS

Total number of dots adjustment

Format

DOTS=<Number of dots:Number>

GET□DOTS / ?△DOTS

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	X	O	O	X	X	X	X

Response

"i:OK" is returned if the parameter was set properly.

For 'GET DOTS' or '?DOTS', current total number of dots is returned as 'g:DOTS=<Number of dots:Number>'

For details on other responses, refer to the "Error List".

Description

(1)This designates the total number of dots for one horizontal period.

(2)This command functions in the same way as when "Display setting" - "Input signal settings" - "Total number of dots" are selected on the menu.

(3)If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned as an error response.

(4)If signals are not input, 'e:2010 NO_SIGNAL' is returned.

(5)Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.

(6)The GET command can be used to obtain the current total number of dots. ("GET DOTS")

Example

Setting

>	DOTS=1650	The total number of dots is 1650.
<	i:OK

Reference

>GET DOTS or ?DOTS This retrieves the total number of dots.

< g:DOTS=1200

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 28 -