Canon Mute, This mutes the volume, Projector WUX10 MarkII User Commands, Format, Environment

Projector WUX10 MarkII User Commands

MUTE

Mute control

Format

MUTE=<Mute control parameter: ID>

GET□MUTE / ?△MUTE

<Mute control parameter: ID>

ON	This turns off the audio/beep sound.
OFF	This returns the audio/beep sound to its original setting.

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET MUTE' or '?MUTE', current mute setting is returned as

'g:MUTE=<Mute control parameter: ID>'

For details on other responses, refer to the "Error List".

Description

(1)This command is used to set the sound output muting to ON or OFF.

(2)Mute control enables simultaneous control of the audio and beep sound.

(3)This command is identical to pressing the MUTE button on the remote control.

(4)The mute setting is always "OFF" when the power has just been turned on.

(5)The volume can be set even when it is on "MUTE".

(6)The current muting status can be acquired using the applicable GET command. ("GET MUTE")

Example

Setting

>	MUTE=ON	This mutes the volume.
<	i:OK

Reference

>GET MUTE or ?MUTE This retrieves the volume state.

< g:MUTE=ON

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 52 -