Projector WUX10 MarkII User Commands
6AXR-Y
Format
6AXR=<R hue:Number>▽<R saturation:Number> 6AXG=<G hue:Number>▽<G saturation:Number> 6AXB=<B hue:Number>▽<B saturation:Number> 6AXC=<C hue:Number>▽<C saturation:Number> 6AXM=<M hue:Number>▽<M saturation:Number> 6AXY=<Y hue:Number>▽<Y saturation:Number> GET□6AXR / ?△6AXR
GET□6AXG / ?△6AXG
GET□6AXB / ?△6AXB
GET□6AXC / ?△6AXC
GET□6AXM / ?△6AXM
GET□6AXY / ?△6AXY
Setting values for <R/G/B/C/M/Y hue:Number> are
Setting values for <R/G/B/C/M/Y saturation:Number> are
Environment
| Power |
|
|
|
| Input | |||
OFF | ON | PM | COMP | VIDEO | HDMI | None | |||
X | O | X | - |
|
|
|
Response
"i:OK" is returned if the parameter was set properly.
For 'GET 6AX*' or '?6AX*', current
For details on other responses, refer to the "Error List".
Description
(1)This sets the
(2)This command functions in the same way as when "Image adjustments" - "Advanced adjustments" -
(3)If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4)These commands take effect when they have been set to valid using the
(5)This sets the currently selected input signal and image mode.
(6)The current
Example
Setting
> | The R hue is set to | |
< | i:OK |
|
Reference
>GET 6AXR or ?6AXR This retrieves the R hue and color saturation.
< g:6AXR=12,
*Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
Changes
Revised by
Approved by
- 14 -