Canon Mode, Projector WUX10 MarkII User Commands, Format, Environment, Response, Description

Projector WUX10 MarkII User Commands

MODE

Control mode switch

Format

REMOTE

LOCAL

GET□MODE / ?△MODE

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
-			-

Response

"i:OK" is always returned with the control mode switch setting. For 'GET MODE' or '?MODE', current control mode is returned as

'g:MODE=REMOTE'

'g:MODE=LOCAL'

For details on other responses, refer to the "Error List".

Description

(1)There are no 'local' and 'remote' control modes with this version of the user commands, however, this command exists to maintain compatibility with previous versions of the user commands.

(2)However, differences between previous versions of the user commands are as follows. <1> Drive will not stop during zoom or focus. (Stopped with previous versions.)

<2> The power management standby status will not change. (Changed to "Power ON" (Lamp ON) with previous versions.)

<3> The digital zoom will not change. (Cancelled with previous versions.)

<4> The presentation timer display will not change. (Cancelled with previous versions.) <5> The BLANK status will not change. (Cancelled 'NoShow' with previous versions.) <6> The FREEZE status will not change. (Cancelled FREEZE with previous versions.)

<7> Process under execution will continue. (Process was interrupted with previous versions.)

(3)The current control mode can be obtained using the GET command. ("GET MODE")

Example

Mode switch

>REMOTE < i:OK

Mode reference

>GET MODE or ?MODE < g:MODE=LOCAL

*Commands are indicated by ">", and responses are indicated by "<".

Revision History / Date

Changes

Revised by

Approved by

- 51 -