Canon Image, Projector WUX10 MarkII User Commands, Format, Environment, Response, Description

Projector WUX10 MarkII User Commands

IMAGE

Image mode setting

Format

IMAGE=<Image mode setting parameter:ID>

GET□IMAGE / ?△IMAGE

<Image mode setting parameter:ID>

STANDARD	Standard
PRESENTATION	Presentation
SRGB	sRGB
MOVIE	Movie
PHOTO	Environmental light compatible sRGB
DCM_SIM	DICOM monochrome *

* "e:000A INVALID_PARAMETER" is returned if the model is not DICOM compatible

Environment

	Power					Input
OFF	ON	PM	D-RGB	A-RGB1	A-RGB2	COMP	VIDEO	HDMI	None
X	O	X	-

Response

"i:OK" is returned if the parameter was set properly.

For 'GET IMAGE' or '?IMAGE', current image mode is returned as

'g:IMAGE=<Image mode setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1)This sets the image quality.

(2)This command functions in the same way as when "Image adjustment" - "Image mode setting" are selected on the menu.

(3)The final settings for the image mode are retained even when the power is turned off.

(4)Changing the setting may modify the following setting values.

Setting	Commands related to the settings
Brightness	BRI
Contrast	CONT
Sharpness	SHARP
Gamma adjustment	GAMMA
Dynamic gamma	DGAMMA
Progressive	PROG
Saturation/Hue	SAT/ HUE
Memory color adjustment	MEMCADJ
RGB gain/offset adjustment	RGBGAIN/RGBOFFSET
Lamp mode	LAMP
6-axis adjustment	6AXADJ
6-axis color correction	6AXR～Y

(5) The current image quality can be acquired using the applicable GET command. ("GET IMAGE")

Revision History / Date

Changes

Revised by

Approved by

- 40 -