2.1Detaching the arm/stand (for VESA wall mount)
The detachable stand of the VE276Q/VK276Q Series LCD monitor is specially designed for VESA wall mount.
To detach the arm/stand:
1.Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table.
2.Use a screwdriver to remove the two screws that secure the stand to the monitor.
3.Detach the stand from the monitor.
•We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
•Hold the stand of the monitor while removing the screws.
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 7.9 Kg (Screw size: 4 x 12 mm).
Chapter 2: Setup |
