NEC 1080Xd 35. HC Subcommands cont’d, Service Processor, arg1, arg2, arg3, arg4, Description

Table 3-35. HC Subcommands (cont’d)

cmd	arg1	arg2	arg3	arg4	Description
attach	iorx	n	m	p	Associates the IOR having the physical number
(cont’d)					x with the logical IOR number m of partition n.
					(m: The number recognizable by the BIOS and
					software.)
					“p” (0-9) sets the priority.
					Indicates which IOR is used with a higher
					priority if the number of normal CELLV Boards is
					smaller than the number of normal IORs due to
					CELLV Board failure in the partition. (Smaller
					values have a higher priority, and the IORs with
					larger values get isolated one by one. If the
					priority number is the same, the one with a
					smaller physical IOR number has a higher
					priority.)
					This command can be used to change the
					logical IOR number and priority if it has been
					already associated.
					The logical IOR number must be unique within
					the partition.
					You cannot change the logical IOR number or
					priority of the IOR which is in the online state.
					"Priority 0" is allowed one time for one partition
					and a Basic I/O Board must be connected. If
					any failure occurs in this IOR, the partition
					cannot be started.
					The IOR0 must have priority 0.
detach	-	-	-	-	Used to cancel the associations between
					partition numbers and CELLV Boards/IORs.
					You cannot detach any component that is in the
					online state.
					The number of CELLV Boards in a partition
					must be greater than or equal to the number of
					IORs.
					Displays Help of “detach” when the argument is
					omitted or an error is made.
	cellx	-	-	-	Disassociates the CELLV Board having the
					physical number x from the currently associated
					partition.
	iorx	-	-	-	Disassociates the IOR having the physical
					number x from the currently associated partition.

Service Processor 3-35