6.Press Esc on the service processor (SP) keyboard. The iSP (service processor) login prompt appears.

7.Enter the login name spfw and password nec. (The login name and password are default values.) The iSP Main Menu screen appears (see Figure 2-6).

8.At the iSPyz prompt, enter the iSP command s to enter the SP command mode.

9.Press Esc.

Integrated Service Processor.

Cabinet-ID:xx, Location:y, State:ssssss

iSP login: spfw<ENTER>

iSP password: xxxxxxxx<ENTER>

Copyright (C) 2002 NEC Corporation, All Rights Reserved. Welcome to Integrated Service Processor.

iSP FW version : 01.00 generated on 01/31/2002 19:20:33

iSP MAIN MENU

0)OS(BIOS) serial console of partition#0 (INITIALIZING)

1)OS(BIOS) serial console of partition#1 (RUNNING) V) Virtual System Operator Panel

S) iSP commands E) Exit

iSPyz> s

 

***** SP Command Mode

****

***** enter ESC to do the command input effectively

*****

***** enter CTRL+B to quit

*****

iSPyz:--->

 

Figure 2-6. SP Console Screen – SP Firmware Activated

2-6 System Operation

Page 34
Image 34
NEC 1080Xd manual SP Console Screen SP Firmware Activated System Operation