NEC 1080Xd manual PC Power Cycle, PC Display Screen

PC (Power Cycle)

Execution:

This command can be executed on a partition in the following state:

!Automatic startup completed

!Execution of UP command.

The partition is in a DC POWER ON state.

Function:

Turns off the power (DC) of the system, and then turns it on again to start up the system.

Note: This command turns off the system regardless of the operation state of the OS or BIOS and without notifying either.

Note: The PC command can be executed in Normal mode or

Maintenance mode.

Table 3-43. PC Display Screen
Screen Image	Reference
iSPyz:---> pcENTER>
CAUTION:
System power will be turned off without any notice to the softwares even if they are
running.
Enter partition number (0-3/all/CR=exit) : all<ENTER>	A
Execute OK? (y/[n]) y<ENTER>	B
PC command was accepted. System power of all partitions will be turned off soon and	C
then will be turned on.
[iSPyz:INFO.ccc] partition 0 : power off sequence started.
[iSPyz:INFO.ccc] partition 1 : power off sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power off sequence completed normally.
:
[iSPyz:INFO.ccc] partition 0 : power on sequence started.	D
[iSPyz:INFO.ccc] partition 1 : power on sequence started.
:
[iSPyz:INFO.ccc] partition 1 : power on sequence completed normally.
:
[iSPys:INFO.ccc] partition 1 : handed off the control to BIOS.

Service Processor 3-55