4.Locate the server LAN cable at the rear of the server cabinet. Connect a client PC to the server LAN connection.

Note: A LAN cable either comes already connected to the Service Processor board or it is connected by the NEC technician during the server installation.

5.Connect peripheral devices, such as a monitor, mouse, and keyboard, to the rear of the server. See Figure 2-2 for server connector locations.

A B

AVGA Monitor Connector

BMouse and Keyboard Connectors

Figure 2-2. Server Connector Locations

!CAUTION

When connecting a cable to an I/O board, be sure to leave enough cable free for sliding the main chassis or PCIX unit out of the cabinet. Route the cable so it does not get pinched or damaged.

Route the external device cables under the rear door frame and out of the way of the rear server door.

6.Close and lock the rear server door.

System Operation 2-3

Page 31
Image 31
NEC 1080Xd manual Close and lock the rear server door