
OS Boot from EFI Shell
You can boot the OS from the EFI Boot Manager. You can also boot the OS by entering commands from the EFI Shell.
An example follows for booting the OS from the SCSI hard disk drive in a hardware configuration containing:
!IDE
!SCSI HDD: OS boot disk
!External LAN card built into the Expansion PCI slot.
Note: Cards are available if they are supported by the application programs or OS.
1.Specify the file system. Change the current file system to the file system with the connected boot device by entering the device at the Shell prompt.
For the example in the following screen (see Figure
Shell> map | Boot device | |
Device mapping table |
| |
fs0 | : Acpi(PNP0A03,3)/Pci(20)/Scsi(Pun0,Lun0)/HD(Part1,Sig0A7C0000) | |
fs1 | : Acpi(PNP0A03,0)/Pci(21)/Ata(Primary,Master)/CDROM(Entry1) | |
blk0 | : Acpi(PNP0A03,3)/Pci(20)/Scsi(Pun0,Lun0) |
|
blk1 | : Acpi(PNP0A03,3)/Pci(20)/Scsi(Pun0,Lun0)/HD(Part1,Sig0A7C0000) | |
blk2 | : Acpi(PNP0A03,3)/Pci(20)/Scsi(Pun0,Lun0)/HD(Part2,Sig0A7C0000) | |
blk3 | : Acpi(PNP0A03,0)/Pci(21)/Ata(Primary,Master) |
|
blk4 | : Acpi(PNP0A03,0)/Pci(21)/Ata(Primary,Master)/CDROM(Entry1) |
Shell> fs0:
Enter fs0:
Figure 2-14. Specifying the File System on the Shell Screen
2.Change the current working directory to the directory in which the OS loader is stored.
For example, enter cd os and press Enter at the Fs0:\ prompt.
3.At the fs0:\os prompt, enter ls and press Enter to display a directory list of files (see the following Figure