
6.Install the board in the appropriate slot.
Note: See the previous sections in this chapter to select the correct slot for your board type. Correct slot location can optimize board performance.
!Carefully remove the slot cover.
!WARNING
Take care when removing the slot cover. System power is on during this installation. Dropping a slot cover can create a short circuit, causing personal injury and damage to the system if the slot cover makes contact with a connector.
!Insert the board into the slot.
Figure 5-13 PCIX Unit PCI Slots
7.Replace the access cover (see Figure
!Swing the cover back over the slots.
!Press the cover down and check that the cover latches are secured.
!CAUTION
To prevent damage to the cover and chassis, check that the cover is secured and can clear the chassis when you slide the unit into the server.
I/O Board Installation