NEC 1080Xd manual CM Change Command Mode, CM Command Screen, CM Screen References, Screen Image

CM (Change Command Mode)

Execution:

This command can be executed in the AC POWER ON state or DC POWER ON state. Entering Maintenance mode requires the entry of a password.

Function:

Changes from Normal mode to Maintenance mode. When the system is in Maintenance mode, the Status LED on the front of the server is amber.

Note: The CM command can be executed in Normal mode or

Maintenance mode.

Table 3-19. CM Command Screen

Screen Image

iSPyz:---> cm<ENTER>

Password is needed to enter maintenance mode. maintenance password : xxxxxxxx <ENTER> incorrect.

maintenance password : xxxxxxxx <ENTER>

Command Mode was changed to maintenance mode.

Reference

A

B

	Table 3-20. CM Screen References
Reference	Description
A	To switch from Normal mode to Maintenance mode, a password is required.
	If you enter a wrong password, a message is displayed and the system waits for
	another password entry. If you enter an incorrect password three times in a row, the
	command terminates.
	Passwords are case sensitive.
B	After the mode change to Maintenance mode is displayed, the command terminates.

Service Processor 3-17