Manuals / NEC / Computer Equipment / Server

NEC NX7700i, 5020M-16 operation manual SP Command Reference

Models: 5020M-16 NX7700i

1 149

Download 149 pages 48.62 Kb

Page 51

Image 51

Base Module

2.4.6.SP Command Reference

This section provides command reference describing the details of SP commands.

Command availability on the master iSP, backup iSP, and undetermined iSP is indicated on the first page of each command.

(Legend)

m	b	u
X

m: Command validity on the master iSP. X denotes “valid.” b: Command validity on the backup iSP. X denotes “valid.” u: Command validity on the undefined iSP. X denotes “valid.”

The example above indicates that the commands are valid only if the iSP is assigned as the master.

The SP commands and subcommands are not case-sensitive. For this reason, case-sensitive data such as accounts and passwords is clearly indicated.

[Note]

*When the following list (a list of codes indicating the system configuration) is included in the command description, this system corresponds to 8Way:

•8Way

•32Way

•ISPF

If the above indication is omitted, this description is common across the system.

855-900549

2-32

Page 51

Image 51

NEC NX7700i, 5020M-16 operation manual SP Command Reference

Contents

NEC Corporation 855-900549-A Rev NX7700i/5020M-16 Operation ManualOutside the European Disposingused NEC In the European UnionSafety Precautions Failure processing Handling of the lithium batteryDo not touch the internal components of the equipment Do not insert foreign materials into the equipmentHandling of the laser product Disposing/collecting/recycling the equipment18kg 矢印を上に向けて取り付けること。 CAUTIONUse CopperConductors only ATTENTIONNutilisez que les conducteurs de cuivre ATTENTIONMACHINE a FORT COURANT de FUITE注※意：保守時は安定板を引き出すこと。 CAUTIONDisconnect input power before removing this cover注※意：カバーを開ける前に入力電源分電盤切断のこと。 ATTENTIONCouper lalimentation electrique avant de demonter ce capot警告 WARNING 保守者の方へ警告 WARNING 保守者の方へMARKINGS 243-304367-GRPMARKINGS 243-306629-GRPRev. 1, May PrefaceLife of Data Cartridge Tape for the DAT Unit ContentsCleaning Schedule Preventing Accidental Erasure of DataDigital Audio Tape System StartupFigure. External Views of the Cabinet Chapter 1 NX7700i/5020M-16 System Overview1.1. Configuration and Specifications of the Base Module I/O MODULE POWER BAYFigure. Layout of Parts in the Base Module NX7700i/5020M-16 System OverviewTable. Base Module Specifications 545Kg Table. Base Module Specifications Cont’dNX7700i/5020M-16 System Overview Main Cabinet1.2.3. Adding Cells 1.2. Expandability1.2.1. Adding Processors 1.2.2. Expanding Memory CapacityFigure. System Configuration Itanium2NX7700i/5020M-16 System Overview Base Module ChapterBase Module Figure. Doors of CabinetFigure. Image of Partitions 2.1. Partition FunctionPOWBAY#1 2.2. Name and Function of Components 2.2.1. Cabinet Primary CabinetBASE MODULE BASE MODULE2.2.5. I/O Module 2.2.3 Expansion Power Bay2.2.2 Base Module 2.2.4 Cell2.2.6. Power Bay 2.2.7. iSP Figure. Rear panel of iSP Installed in the Base ModuleBase Module 2.2.8. DVD-ROM Unit 2.2.8.1. Loading and Unloading MediaFigure. Loading and Unloading DVD-ROM/CD-ROM 2.2.9.3. Preventing Accidental Erasure of Data 2.2.9. DAT Unit2.2.9.1. Location of Index Labels 2.2.9.2. Notes on Index Labels2.2.9.7. Life of Data Cartridge Tape for the DAT Unit 2.2.9.4. Cleaning the DAT Unit2.2.9.5. Cleaning Schedule 2.2.9.6. Cleaning Medium for the DAT Unit2.2.9.9. Notes on the DAT Unit 2.2.9.10. Loading and Unloading Digital Audio TapesFigure. DAT Units 2.2.10. Notes on Installing the UPS AC SW P1Figure. Jumper Connector for Installing the UPS AC SW AC SWCB1 P3 AC SWLED CARD 2.2.11. System LEDs2.3.1. SP Console 2.3. ConsolesBase Module Figure. Console Connection Diagram2.4.1.1. Type of Console Connections 2.4. Service Processor SP2.4.1. Console Connection and Login 2.4.1.2. Accessible Console Functions2.4.1.3. Console Status and Login Authentication Password required Serial console inoperative Press ESC Choose Exit iSP login promptLogin password required CM command2.4.1.4. Login and Main Menu Description The “backup” indicator will not appear if no backup SP existsScreen Example…BOOT FW iSP BOOT MAIN MENU S iSP commands E Exit2.4.2. Note Possible Events including operator entries and System ResponsesBase Module CTRL+B 2.4.3. OS BIOS ConsoleDescription Possible Events including operator entries and System ResponsesBase Module Virtual System Operator Panel 2.4.4. Virtual SOPDescription Possible Events including operator entries and System ResponsesBase Module Base Module 2.4.4.1. Details of Partition Status DisplayCTRL+B 2.4.5. SP Command ConsoleOSBIOS serial console of partition#0 INITIALIZING Base Module2.4.5.1. SP Command Console Buffer 2.4.5.2. SP Command Prompt2.4.5.3. SP Message Header Base Module 2.4.5.4. SP Command ListThe following tables contain SP command lists by category System ControlFigure. System Status Transitions and System Control Commands Base Module ConfigurationNormal mode other commands Settings2.4.6. SP Command Reference 2.4.6.1. DF Shut down System Power override FunctionBase Module Base Module DescriptionFunction 2.4.6.2. DN Shut down System PowerBase Module 2.4.6.3. DP System DumpDP command was accepted. Dump button interrupt will be generated soon FunctionBase Module 2.4.6.4. DT SP Data and TimeAlways valid without regard to the current system status FunctionAlways valid without regard to the current system status 2.4.6.5. EN Environmental Information32Way For one or two AC power receiving systems ISPF does not have two AC power receiving systemsThe following information will be missing for 8Way Base Modulec d e f 2-39Base Module 2-41 Base Moduletentative Base ModuleThe numbers of PCI Bay cards are changed on 32Way/8Way and ISPF tentativeBase Module DescriptioniSPyz--- fv ENTER 2.4.6.6. FV Firmware VersionsAlways valid without regard to the current system status FunctionFunction 2.4.6.7. HC Hardware ConfigurationBase Module Base Module Base Module This command is currently not supportedBase Module arg1 Base ModuleBase Module Base Module arg2 This command is currently not supportedBase Module arg1Base Module This command is currently not supportedBase Module Base Module Base Module Description of Status Indicator StringsBase Module iSPyz--- hc ENTERHC helpENTER The SM size is shown for the ISPF Base Moduleb c d e 2-59For 32WayH Base Module1 LIN=x,y,z x Logical IOX number z “S” if SCSI SPLIT Mode is selected, and “N” if it is deselectedBase Module For 32WayBFor 8Way MMXx2 and MMXx3 are only shown for 32WayB Base ModuleFor ISPF For 32WayB, 8Way, or ISPF2-63 Base ModuleCELL1 Base ModuleTAG0e TAG0oBase Module j j j2-65 For 32Way, subsequently listed to the max. XBX Card number 2 Listed for the PCI Bay in which the Core Cards are installed3 Listed for the PCI Bay in which the Core Cards are installed Base Module2-67 Base ModuleBase Module POWBAYs Main cabinetPOWBAYs Expansion cabinet 2-69 For the 8Way/ISPF model, there are three DPSs in Power BayFor the ISPF, Power Bay1 for dual AC systems is not configured Base ModuleBase Module DescriptionBase Module 2.4.6.8. HE HelpAlways valid without regard to the current system status FunctionBase Module 2.4.6.9. ML Message LogAlways valid without regard to the current system status FunctionBase Module DescriptionpcENTER 2.4.6.10. PC Power CycleiSP0mINFO.2129 partition 0 handed off the control to BIOS FunctionrsENTER 2.4.6.11. RS Cold Reset SystemFunction Base ModuleFunction 2.4.6.12. SG SP/System SettingSetting partition boot method and hot-plug permission Always valid without regard to the current system statusBase Module ISPFLAN/Serial SP default FTP Server Configuration SP SNMP ConfigurationBase Module bENTER Base ModuleDescription sgENTERonENTER Base Module2ENTER ENTERBase Module DescriptionBase Module Base Module DescriptionBase Module DescriptionManager1 LAN0 IP Base ModuleBase Module Descriptionfile path cmossave/cmos1.bin ENTER 2.4.6.13. SR Save System CMOS/NvRAMFunction Base ModuleDescription DescriptionDescription No mm/dd/yyyy HHMMSS 0------- System initialization started. SPFWRxx.xx 2.4.6.14. UB Bring up BIOSFunction Base ModuleBase Module 2.4.6.15. UP Bring up SystemThis command is valid to inactive partitions DC Off Function3.1. System Startup 3.1.1. System Startup Procedure Chapter 3 Operation ProcedureStart Operation ProcedureSee step 3 in next page Expansion power bay/Base module AC ON See steps 7 to 11 in next page OS BootRemark Operation Procedure Operation Procedure 3.1.2. SP Console Messages2 Example of SP console screen during system startup Operation ProcedureOperation Procedure 3.2. System Shutdown 3.2.1. System Shutdown Proceduremodule See steps 7 and 8 in next page Turn off peripherals Operation ProcedureSee step 6 in next page Turn off AC to expansion power bay/base Start Shut down OS See step 1 in next page Turn off console PCSee 2.2.1 Cabinet for the location of the switch panel. See 2.2.6 Power Bay for the location of the AC switch on the base module and expansion power bay. The number of switches on the switch panel depends on the number of installed base modules and expansion power bays. Take care of the association between these switches and base modules and expansion power bays during switch operation. The switches on the switch panel are used for immediate power shutdown for emergency purposes. When a switch on this panel is turned off, data may be destroyed 3-10 3.2.2. SP Console MessagesOperation Procedure 1 Example of DC power off display on SP console screenProvide criteria for operating the AC switch and use the switch 3.3. Emergency System Shutdown with AC SW3.4. AC-LINK Auto Control Data may be destroyed when the AC switch is turned off during3-12 Operation Procedure1 SP console screen and operation during AC LINK setup = Enable AC LINK and pressUse the OS console to operate the EFI Shell. Inputs from the 3.5. OS Boot3.5.1. OS Boot with Boot Manager Before Installing the OS Use the arrow keys to change settings„ Image of the OS Boot screen displayed by the EFI Boot Manager Use the arrow keys to change settingsSLES9 3.5.4. EFI Shell Commands 3.5.3. EFI ShellEFI Shell Commands Operation Procedure CommandDescription Operation Procedure CommandDescription 3.5.5. OS Boot from EFI Shell fs0¥os ls Operation ProcedureBoot the OS loader fs0¥ cd os3.5.6. EFI Devices Computing UID Example 3.5.7. EFI Boot Option Maintenance Description Boot Maintenance Menu OptionsOperation Procedure Option3.5.7.1. Boot from a File „ Image of the Boot from a File screenOperation Procedure 3.5.7.2. Add a Boot Option ディレクトリを選択して実行プログ登録できま 3.5.7.4. Change Boot Order 3.5.7.3. Add Boot Options3.5.7.5. Manage BootNext Setting 3.5.7.6. Set Auto Boot Timeout AcpiPNP0A03,0/Pci30/Mac00004C717743 3.5.7.7. Setting the Network BootChanging procedure 1 Activate the EFI Boot Manager 3.5.7.8. Changing BIOS Settings EFI System Configuration Menu Processor Configuration 3.6. System Dump 4.1. Troubleshooting Chapter 4 Troubleshootingpressing the SHIFT key on the screen 5.3. Digital Audio Tape Chapter 5 Notes on Handling5.1. Transportation 5.2. DVD-ROM/CD-ROMFigure 5-1 Cleaning Locations 5.4. Cleaning5.5. Notes on Installation Memo Notes on Handling