NEC NX7700i, 5020M-16 operation manual Base Module

Base Module

cmd	arg1	arg2	arg3	arg4	Description
	rowxzz	-	-	-	Enable the ROW.
					x is a physical CELL number (0-7).
					zz is a ROW number (00-15), which must
					always be specified with a 2-digit number.
					For the 32Way(H) model, the corresponding
					Directory memory is also enabled.
					There is no individual DIMM control. The
					DIMM is automatically detected on boot-up.
	dirxzz	-	-	-	For the 32Way(H) model, use this argument
					to enable the Directory memory and the
					corresponding ROW memory.
					This command is invalid to the
					32Way/8Way/ISPF models.
					x is a physical CELL number (0-7).
					zz is a Directory number (00-15), which must
					always be specified with a 2-digit number.
					There is no individual DIMM control. The
					DIMM is automatically detected on boot-up.
	tagx[sy	-	-	-	Enable the TAG for 32Way(B)/8Way/ISPF
	z]				models.
					x is a physical CELL number (0-7).
					s should be either ‘e’ (EVEN side) or ‘o’
					(ODD side).
					y is a TAG Bank number (0-1).
					z is a TAG Bank level number (0-5).
					If s, y, and z are all omitted, all the TAGs
					under the CELL Card specified by x are
					enabled.
	pcibx	[all]	-	-	Enable the PCI Bay.
					x is the DGI/I2C cable port number (0-7) that
					connects iSP to PCI Bay.
					Always specify “all” for arg2, so that all the
					subcomponents including the PCI Bay itself
					are enabled.
	ioxx	[all]	-	-	Enable the IOX.
					x is a physical IOX number (0-7).
					If arg2 is omitted, only the IOX is enabled,
					with its subcomponents left disabled.
					If “all” is specified for arg2, the IOX Card is
					enabled including all of its subcomponents.
		iocy	-	-	Enable the IOC.
					y is an IOC number (0 or 1) within an IOX.
	gxbxy	-	-	-	Enable the GXB on the Core IO Card.
					x is the DGI/I2C cable port number (0-7) that
					connects iSP to PCI Bay.
					y is a GXB number (0).
	cpcixy	-	-	-	Enable the slots (1-2) on the Core IO Card.
					x is a PCI Bay number (0-7).
					y is a slot number (1-2).
	pxhxy	-	-	-	Enable the PXH.
					x is the DGI/I2C cable port number (0-7) that
					connects iSP to PCI Bay.
					y is a PXH number (0-3).
	pcix0y	-	-	-	Enable the slots (1-8) on the PXH.
					x is a PCI Bay number (0-7).
					y is a slot number (1-8).

855-900549 2-52