NEC 5020M-16, NX7700i operation manual DVD-ROM Unit, Loading and Unloading Media

Base Module

2.2.8.DVD-ROM Unit

One DVD-ROM unit can be installed for each I/O module. A DVD-ROM unit is mounted on each I/O module as standard equipment. The DVD-ROM and CD-ROM media can be used on the DVD-ROM unit.

2.2.8.1.Loading and Unloading Media

(1) Loading DVD-ROM/CD-ROM

1)Open the front cover, and remove the mask. (loosen the hand screw).

2)Push the Eject button lightly, and the tray pops out.

3)Place DVD-ROM/CD-ROM securely on the tray.

4)Push the Eject button lightly, and the tray goes back in the drive.

(2)Unloading DVD-ROM/CD-ROM

1)Be sure that the DVD-ROM drive access indicator LED (orange) goes off.

2)Push the Eject button lightly, and the tray pops out.

3)Take out DVD-ROM/CD-ROM.

CAUTION

Be careful not to touch the tray while it recesses in the drive unit to prevent hand injury.

ＤＶＤ-ROM

ＤＶＤ-ROM ＤＶＤ or CD-R/RW

Eject button Tray

Figure. Loading and Unloading DVD-ROM/CD-ROM

2-7855-900549