NEC NX7700i, 5020M-16 operation manual Base Module, This command is currently not supported

Base Module

cmd	arg1	arg2		arg3	arg4	Description
swap	-	-	-		-	This command is currently not supported.
						This command can be used to swap a CELL
						with another CELL while the software is
						running (it is not a combination of
						attach/detach commands, but provides a
						function exclusive to this command).
						If no argument is specified or an argument
						has an error, the swap command help opens.
						While this command is valid to running
						partitions, it is only functional when it is used
						with the OS that supports online
						attach/detach capability.
						This command is supported on the 32Way(B)
						and 8Way models.
	cellx	celly	-		-	Swap a running CELL having physical CELL
						number x with another CELL having physical
						CELL number y.
						CELLy must be the one that is not attached
						to any partition.
						For CELL swapping, an invalid partition is
						needed to which no CELLs or IOXs belong.
						When swapping is complete, CELLx is
						detached from the partition, while CELLy is
						attached to it.
						Logical CELL number is transferred from
						CELLx to CELLy.
smem	-	-	-		-	This command is only supported on the ISPF
						model. It is not supported on any other
						models.
						Use this command to set the size of the
						memory area shared by partitions.
						If no argument is specified or an argument
						has an error, the smem command help
						opens.
						This command is valid to partitions that are
						not running.
	n	mmm	-		-	Set the shared memory size for the partition
						with partition number n, in a GB increment.
						It is not allowed to change the shared
						memory size for active partitions.
						No shared memory is used if 0 is specified.
cmem	-	-	-		-	This command is only supported on the
						32Way(B) model. It is not supported on any
						other models.
						Use this command to set the size of the
						memory used for inter-CELL interleaving. If
						no argument is specified or an argument has
						an error, the cmem command help opens.
						This command is valid to inactive partitions.
	n	mmm	-		-	Set the memory size for inter-CELL
						interleaving for partition number n, in a GB
						increment.
						No interleaving is used if 0 is specified.
						Numbers that are not multiples of 16 GB will
						be rounded to multiples of 16 GB.

855-900549 2-48