NEC NX7700i, 5020M-16 operation manual DP System Dump, Function, Base Module

Base Module

2.4.6.3.DP (System Dump)

m	b	u
X

*The command is executable to the active partition (after automatic system boot/UP command execution).

Function:

This command causes a Dump interrupt to the system after a system dump is taken.

Whether a system dump is actually taken or not, or a system reset is subsequently activated or not, depends on the system software (OS or BIOS). This command only causes a Dump interrupt.

Nothing will happen, of course, if the software is not running.

(Screen Example)

	Description
	No.
iSPyz:---> dp<ENTER>
Dump button interrupt will be generated.
Enter partition number (0-7/all/CR=exit) : all<ENTER>	(a)
Execute OK? (y/[n]) y<ENTER>	(b)
DP command was accepted. Dump button interrupt will be generated soon.	(c)
[iSPyz:INFO.ccc] partition 0 : dump button interrupt.
[iSPyz:INFO.ccc] partition 1 : dump button interrupt.
:	(d)
:
:

(Description)

Description	Description
No.
(a)	Enter the target partition number here.
	If “all” is specified, all the existing partitions are the target of this command.
(b)	A confirmation message appears.
	If you are sure to continue command execution, enter “y.”
(c)	A “DP command accepted” message appears.
	Actual processing progresses in the background.
(d)	Shows progress in the background.

855-900549 2-36