NEC NX7700i, 5020M-16 operation manual Base Module, iSPyz--- hc ENTER, HC helpENTER

Base Module

(Screen Example … Help Screen)

		Description
		No.
iSPyz:---> hc<ENTER>
iSP FW version is Rxx.xx.
HC> help<ENTER>		(a)
HC command help :
help	: print this message.
disp	: display current status.
smem	: set size of shared memory of a partition.
attach	: attach CELLs and IOXs to a partition.
detach	: detach CELLs and IOXs from a partition.
swap	: swap CELLs in a partition.
add	: add a component.
delete	: delete a component.
enable	: enable a component.	(b)
disable	: disable a component.
online	: make a component online.
offline	: make a component offline.
led	: turn on/off maintenance LED of a component.
loc	: set location info.
clear	: clear memory bit error counters.
check	: check illegal configuration.
bio	: add and set a bio to a pcibay.
scsi_split : set/reset split mode of SCIS on PCIBAY
quit	: quit from HC command prompt.

(Description)

Description

No.

Description

(a)If “help” is entered, the HC command help opens.

(b)An HC command list appears.

(Screen Example … ALL Screen)

														Description
														No.
iSPyz:---	> hc<ENTER>
iSP FW version		is Rxx.xx.
HC> disp all<ENTER>
(32Way) The CIMB-CELL interleave memory size is only shown for the 32Way(B) model.
When operating in inter-CELL interleave mode, an asterisk “*” appears.
==== Partitioning ==================================== 19:20:23,07/31/2005 ===
part0(RUN )		CELL:01	-----	7	(01	-----	2)	IOX:0-----		67 (0-----		12)	CIMB: 32GB*
part1(INIT)		CELL:--	2-----		(--	5-----	)	IOX:-1	------	(-0	------	)	CIMB:128GB	(a)
part2(stop)		CELL:---	3----		(---	4----	)	IOX:--	2-----	(--	0-----	)	CIMB:-----
part3(stop)		CELL:------		6-	(------		3-)	IOX:---	3----	(---	0----	)	CIMB:-----
part4(----	)	CELL:--------			(--------		)	IOX:--------		(--------		)	CIMB:-----
part5(----	)	CELL:--------			(--------		)	IOX:--------		(--------		)	CIMB:-----
part6(----	)	CELL:--------			(--------		)	IOX:--------		(--------		)	CIMB:-----

855-900549 2-58