NEC NX7700i, 5020M-16 operation manual Add a Boot Option, ディレクトリを選択して実行プログ, 登 録 で き ま

Operation Procedure

3.5.7.2.Add a Boot Option

To add a new boot option to the EFI Shell, select [Add a Boot Option] on the Main Menu, and follow the steps below.

1.Select a device containing the boot file.

2.Select a file in the device.

„Image of the Add a Boot Option screen

EFI Boot Maintenance Manager ver 1.10[14.62] Add A Boot Option, Select a Volume:

SelectAdd AddをBoot選択to displayするとthe階directory層を表tree,示し

and select a directory from the tree to enter

ディレクトリを選択して実行プログ

the boot program.

登 録 で き ま

IA64_EFI [Acpi(PNP0A03,3)/Pci(20)Scsi(Pun0,Lun0)/HD(Part1,Sig0

Default Boot [Acpi(PNP0A03,3)/Pci(20)/Scsi(Pun0,Lun0)]

Default Boot [Acpi(PNP0A03,0)/Pci(21)/Ata(Primary,Master)]

LoadFileAcpi(PNP0A03,0)/Pci(20)/SCSI(Pun0,Lun0)/HD(Part1,Sig0A7C0000)

Load File [EFI Shell [Built-in]]

3.Enter a file name (prerequisite: a ASCII or Unicode file name within 240 characters).

4.Select A, U or N, and press the <Enter> key.

5.Confirm that the new boot option was added, and save the change.

6.The new description is entered in the EFI Boot Menu screen.

„Image of the Add a Boot Option screen

Filename:xxxxxxxxxxxxxxxx

DevicePath:xxxxxxxxxxxxxx

Specify the title of the new description to enter in the EFI Bo

Enter New Description: OSLOADER

Enter New Option Data Type [A-Ascii, U-Unicode, N-No BootOption] :Ascii

Enter Boot Option Data [Data will be stored in Ascii String]:

Xxxxx

Specify the boot parameter for starting the application.

Save change to NVRAM [Y-Yes N-No]:

Save the change in NVRAM

855-900549 3-26