NEC 5020M-16, NX7700i operation manual RS Cold Reset System, Function, Base Module, rsENTER

Base Module

2.4.6.11. RS (Cold Reset System)

m	b	u
X

*The command is executable to the active partition (after automatic system boot/UP command execution).

Function:

This command causes the system to be cold-reset.

Note that this command could reset the system while the OS (BIOS) is running, notifying nothing to the software.

Partitions that are already off or those being shut down are not the target of this command.

(Screen Example)

			Description
			No.
iSPyz:--->	rs<ENTER>
CAUTION: System will be resetted without any notice to the softwares even if
they are running.
Enter partition number (0-7/all/CR=exit) : 0<ENTER>			(a)
Execute OK? (y/[n]) y<ENTER>			(b)
RS command	was accepted. All	partitions will be reset soon.	(c)
mm/dd/yyyy	HH:MM:SS 0-------	System shutdown started. (SPFW:Rxx.xx)
:
mm/dd/yyyy	HH:MM:SS 0-------	System shutdown completed. (SPFW:Rxx.xx)
mm/dd/yyyy	HH:MM:SS 0-------	System initialization started. (SPFW:Rxx.xx)	(d)
:
mm/dd/yyyy	HH:MM:SS 0-------	System initialization completed. (SPFW:Rxx.xx)
[iSP0m:INFO.2129] partition 0 : handed off the control to BIOS.
	(DIPSW = 00000000)

(Description)

Description	Description
No.

(a)Prompts a partition number.

If “all” is specified, all the existing partitions are the target of this command.

(b)Enter y at this confirmation message if you are sure to continue command execution.

(c)An “RS command accepted” message appears.

The actual processing progresses in the background.

(d)Shows the progress in the background.

2-75 855-900549