NEC 5020M-16, NX7700i HE Help, Always valid without regard to the current system status, Function

Base Module

2.4.6.8.HE (Help)

m	b	u
X	X	X

* Always valid without regard to the current system status.

Function:

This command is used to show a command list. (“HELP” is also usable as well as “HE.”)

(Screen Example)

		Description
		No.
iSPyz:---> he<ENTER>
iSP commands :
System	Control (both customers and maintenance persons)
DF ‒	Shut down the system (override)
DN -	Shut down the system
DP -	Generate the system dump interrupt
PC -	Power cycle
RS -	Cold reset the system
UB ‒	Bring up BIOS
UP -	Bring up the System
Configuration (both customers and maintenance persons)
HC -	Hardware configuration and partitioning	(a)
Miscellaneous (both customers and maintenance persons)
CM -	Change SP command mode to maintenance mode
DT -	SP Date and Time
EN -	Display environmental information
FV -	Display firmware versions
HE -	Display this help
ML -	Display message log
Settings (both customers and maintenance persons)
SG ‒	SP/System settings
SR -	Save and restore system CMOS/NvRAM to/from FTP server
HE command terminated.

(Description)
Description	Description
No.

(a)Shows the help for commands.

2-71 855-900549