Manuals / NEC / Computer Equipment / Server

NEC NX7700i Base Module, For 32Way, subsequently listed to the max. XBX Card number, XBXC1

Models: 5020M-16 NX7700i

1 149

Download 149 pages 48.62 Kb

Page 85

Base Module

(For 32Way, subsequently listed to the max. XBX Card number.)
---- XBX_C1 ------------------------------------------				19:20:23,07/31/2005	---
:
:
:
(32Way)
---- PCIBAY0(D) --------------------------------------				19:20:23,07/31/2005	---
PCIBAY0(D) (loc=M-00/uu)	ONLINE	enable	DEG	part.0 (LIN=2,P,S)
IOX00	ONLINE	enable	DEG
IB_CABLE port0	ONLINE	enable	---	--->XBX_C0_P04
IB_CABLE port1	ONLINE	enable	---	--->XBX_C2_P04
IOC00	ONLINE	enable	DEG
IOC01	ONLINE	enable	DEG
GXB00	ONLINE	enable	---	BIO(primary)	*2
CORE PCI001	ONLINE	enable	---		*2
CORE PCI002	ONLINE	enable	---		*2
PXH00	ONLINE	enable	DEG
PCI001	ONLINE	enable	---
PCI002	offline	DISABLE	---
PXH01	ONLINE	enable	---
PCI003	ONLINE	enable	---
PCI004	ONLINE	enable	---
PXH02	ONLINE	enable	---
PCI005	ONLINE	enable	---
PCI006	ONLINE	enable	---
PXH03	offline	DISABLE	---
PCI007	offline	enable	---
PCI008	offline	enable	---
*2: Listed for the PCI Bay in which the Core Cards are installed.
(iSPF)
---- PCIBAY0(D) -------------------------------------- 19:20:23,07/31/2005 ---
PCIBAY0(D) (loc=M-00/uu)	ONLINE	enable	DEG	part.0 (LIN=2,P,N)
IOX00	ONLINE	enable	DEG
IXI port0	ONLINE	enable	--- --->XBX_C0_P05
IOC00	ONLINE	enable	DEG
IOC01	ONLINE	enable	DEG
GXB00	ONLINE	enable	---	BIOS(primary)	*3
CORE PCI001	ONLINE	enable	---		*3
CORE PCI002	ONLINE	enable	---		*3
PXH00	ONLINE	enable	DEG
PCI001	ONLINE	enable	---
PCI002	offline	DISABLE	---
PXH01	ONLINE	enable	---
PCI003	ONLINE	enable	---
PCI004	ONLINE	enable	---
PXH02	ONLINE	enable	---
PCI005	ONLINE	enable	---
PCI006	ONLINE	enable	---
PXH03	offline	DISABLE	---
PCI007	offline	enable	---
PCI008	offline	enable	---

*3: Listed for the PCI Bay in which the Core Cards are installed.

(k)

(k)

855-900549

2-66

Image 85

NEC NX7700i, 5020M-16 Base Module, For 32Way, subsequently listed to the max. XBX Card number, XBXC1, PCIBAY0D

Contents

NEC Corporation 855-900549-A Rev NX7700i/5020M-16 Operation Manualused NEC DisposingIn the European Union Outside the EuropeanSafety Precautions Do not touch the internal components of the equipment Handling of the lithium batteryDo not insert foreign materials into the equipment Failure processingDisposing/collecting/recycling the equipment Handling of the laser product18kg Conductors only ATTENTIONNutilisez que les conducteurs de cuivre CAUTIONUse CopperATTENTIONMACHINE a FORT COURANT de FUITE 矢印を上に向けて取り付けること。注※意：カバーを開ける前に入力電源分電盤切断のこと。 CAUTIONDisconnect input power before removing this coverATTENTIONCouper lalimentation electrique avant de demonter ce capot 注※意：保守時は安定板を引き出すこと。警告 WARNING 保守者の方へ保守者の方へ警告 WARNINGMARKINGS 243-304367-GRP243-306629-GRP MARKINGSRev. 1, May PrefaceCleaning Schedule ContentsPreventing Accidental Erasure of Data Life of Data Cartridge Tape for the DAT UnitDigital Audio Tape System StartupFigure. External Views of the Cabinet Chapter 1 NX7700i/5020M-16 System Overview1.1. Configuration and Specifications of the Base Module Figure. Layout of Parts in the Base Module POWER BAYNX7700i/5020M-16 System Overview I/O MODULETable. Base Module Specifications NX7700i/5020M-16 System Overview Table. Base Module Specifications Cont’dMain Cabinet 545Kg1.2.1. Adding Processors 1.2. Expandability1.2.2. Expanding Memory Capacity 1.2.3. Adding CellsItanium2 Figure. System ConfigurationNX7700i/5020M-16 System Overview Base Module ChapterFigure. Doors of Cabinet Base ModuleFigure. Image of Partitions 2.1. Partition FunctionBASE MODULE 2.2. Name and Function of Components 2.2.1. Cabinet Primary CabinetBASE MODULE POWBAY#12.2.2 Base Module 2.2.3 Expansion Power Bay2.2.4 Cell 2.2.5. I/O Module2.2.6. Power Bay Figure. Rear panel of iSP Installed in the Base Module 2.2.7. iSPBase Module 2.2.8.1. Loading and Unloading Media 2.2.8. DVD-ROM UnitFigure. Loading and Unloading DVD-ROM/CD-ROM 2.2.9.1. Location of Index Labels 2.2.9. DAT Unit2.2.9.2. Notes on Index Labels 2.2.9.3. Preventing Accidental Erasure of Data2.2.9.5. Cleaning Schedule 2.2.9.4. Cleaning the DAT Unit2.2.9.6. Cleaning Medium for the DAT Unit 2.2.9.7. Life of Data Cartridge Tape for the DAT Unit2.2.9.10. Loading and Unloading Digital Audio Tapes 2.2.9.9. Notes on the DAT UnitFigure. DAT Units AC SW P1 2.2.10. Notes on Installing the UPSFigure. Jumper Connector for Installing the UPS CB1 P3 AC SWAC SW AC SWLED CARD 2.2.11. System LEDs2.3.1. SP Console 2.3. ConsolesBase Module Figure. Console Connection Diagram2.4.1. Console Connection and Login 2.4. Service Processor SP2.4.1.2. Accessible Console Functions 2.4.1.1. Type of Console Connections2.4.1.3. Console Status and Login Authentication Login password required Serial console inoperative Press ESC Choose Exit iSP login promptCM command Password required2.4.1.4. Login and Main Menu Screen Example…BOOT FW The “backup” indicator will not appear if no backup SP existsiSP BOOT MAIN MENU S iSP commands E Exit DescriptionPossible Events including operator entries and System Responses 2.4.2. NoteBase Module CTRL+B 2.4.3. OS BIOS ConsolePossible Events including operator entries and System Responses DescriptionBase Module Virtual System Operator Panel 2.4.4. Virtual SOPPossible Events including operator entries and System Responses DescriptionBase Module Base Module 2.4.4.1. Details of Partition Status DisplayOSBIOS serial console of partition#0 INITIALIZING 2.4.5. SP Command ConsoleBase Module CTRL+B2.4.5.2. SP Command Prompt 2.4.5.1. SP Command Console Buffer2.4.5.3. SP Message Header The following tables contain SP command lists by category 2.4.5.4. SP Command ListSystem Control Base ModuleFigure. System Status Transitions and System Control Commands Normal mode other commands ConfigurationSettings Base Module2.4.6. SP Command Reference Function 2.4.6.1. DF Shut down System Power overrideBase Module Base Module DescriptionFunction 2.4.6.2. DN Shut down System PowerDP command was accepted. Dump button interrupt will be generated soon 2.4.6.3. DP System DumpFunction Base ModuleAlways valid without regard to the current system status 2.4.6.4. DT SP Data and TimeFunction Base Module32Way For one or two AC power receiving systems 2.4.6.5. EN Environmental InformationISPF does not have two AC power receiving systems Always valid without regard to the current system statusc d e f Base Module2-39 The following information will be missing for 8WayBase Module 2-41 Base ModuleThe numbers of PCI Bay cards are changed on 32Way/8Way and ISPF Base Moduletentative tentativeBase Module DescriptionAlways valid without regard to the current system status 2.4.6.6. FV Firmware VersionsFunction iSPyz--- fv ENTERFunction 2.4.6.7. HC Hardware ConfigurationBase Module Base Module Base Module This command is currently not supportedBase Module arg1 Base ModuleBase Module Base Module Base Module This command is currently not supportedarg1 arg2Base Module This command is currently not supportedBase Module Base Module Base Module Description of Status Indicator StringsiSPyz--- hc ENTER Base ModuleHC helpENTER b c d e Base Module2-59 The SM size is shown for the ISPF1 LIN=x,y,z x Logical IOX number Base Modulez “S” if SCSI SPLIT Mode is selected, and “N” if it is deselected For 32WayHFor 32WayB Base ModuleFor 8Way For ISPF Base ModuleFor 32WayB, 8Way, or ISPF MMXx2 and MMXx3 are only shown for 32WayB2-63 Base ModuleTAG0e Base ModuleTAG0o CELL1j j j Base Module2-65 3 Listed for the PCI Bay in which the Core Cards are installed 2 Listed for the PCI Bay in which the Core Cards are installedBase Module For 32Way, subsequently listed to the max. XBX Card number2-67 Base ModulePOWBAYs Main cabinet Base ModulePOWBAYs Expansion cabinet For the ISPF, Power Bay1 for dual AC systems is not configured For the 8Way/ISPF model, there are three DPSs in Power BayBase Module 2-69Base Module DescriptionAlways valid without regard to the current system status 2.4.6.8. HE HelpFunction Base ModuleAlways valid without regard to the current system status 2.4.6.9. ML Message LogFunction Base ModuleBase Module DescriptioniSP0mINFO.2129 partition 0 handed off the control to BIOS 2.4.6.10. PC Power CycleFunction pcENTERFunction 2.4.6.11. RS Cold Reset SystemBase Module rsENTERSetting partition boot method and hot-plug permission 2.4.6.12. SG SP/System SettingAlways valid without regard to the current system status FunctionISPF Base ModuleLAN/Serial SP SNMP Configuration SP default FTP Server ConfigurationBase Module Description Base ModulesgENTER bENTER2ENTER Base ModuleENTER onENTERBase Module DescriptionBase Module Base Module DescriptionBase Module DescriptionManager1 LAN0 IP Base ModuleBase Module DescriptionFunction 2.4.6.13. SR Save System CMOS/NvRAMBase Module file path cmossave/cmos1.bin ENTERDescription DescriptionDescription No Function 2.4.6.14. UB Bring up BIOSBase Module mm/dd/yyyy HHMMSS 0------- System initialization started. SPFWRxx.xxThis command is valid to inactive partitions DC Off 2.4.6.15. UP Bring up SystemFunction Base Module3.1. System Startup 3.1.1. System Startup Procedure Chapter 3 Operation ProcedureSee step 3 in next page Expansion power bay/Base module AC ON Operation ProcedureSee steps 7 to 11 in next page OS Boot StartRemark Operation Procedure Operation Procedure 3.1.2. SP Console Messages2 Example of SP console screen during system startup Operation ProcedureOperation Procedure 3.2. System Shutdown 3.2.1. System Shutdown ProcedureSee step 6 in next page Turn off AC to expansion power bay/base Operation ProcedureStart Shut down OS See step 1 in next page Turn off console PC module See steps 7 and 8 in next page Turn off peripheralsSee 2.2.1 Cabinet for the location of the switch panel. See 2.2.6 Power Bay for the location of the AC switch on the base module and expansion power bay. The number of switches on the switch panel depends on the number of installed base modules and expansion power bays. Take care of the association between these switches and base modules and expansion power bays during switch operation. The switches on the switch panel are used for immediate power shutdown for emergency purposes. When a switch on this panel is turned off, data may be destroyed Operation Procedure 3.2.2. SP Console Messages1 Example of DC power off display on SP console screen 3-103.4. AC-LINK Auto Control 3.3. Emergency System Shutdown with AC SWData may be destroyed when the AC switch is turned off during Provide criteria for operating the AC switch and use the switch1 SP console screen and operation during AC LINK setup Operation Procedure= Enable AC LINK and press 3-123.5.1. OS Boot with Boot Manager Before Installing the OS 3.5. OS BootUse the arrow keys to change settings Use the OS console to operate the EFI Shell. Inputs from theUse the arrow keys to change settings „ Image of the OS Boot screen displayed by the EFI Boot ManagerSLES9 3.5.3. EFI Shell 3.5.4. EFI Shell CommandsEFI Shell Commands Command Operation ProcedureDescription Command Operation ProcedureDescription 3.5.5. OS Boot from EFI Shell Boot the OS loader Operation Procedurefs0¥ cd os fs0¥os ls3.5.6. EFI Devices Computing UID Example 3.5.7. EFI Boot Option Maintenance Operation Procedure Boot Maintenance Menu OptionsOption Description„ Image of the Boot from a File screen 3.5.7.1. Boot from a FileOperation Procedure ディレクトリを選択して実行プログ 3.5.7.2. Add a Boot Option登録できま 3.5.7.4. Change Boot Order 3.5.7.3. Add Boot Options3.5.7.5. Manage BootNext Setting 3.5.7.6. Set Auto Boot Timeout AcpiPNP0A03,0/Pci30/Mac00004C717743 3.5.7.7. Setting the Network BootChanging procedure 1 Activate the EFI Boot Manager 3.5.7.8. Changing BIOS Settings EFI System Configuration Menu Processor Configuration 3.6. System Dump 4.1. Troubleshooting Chapter 4 Troubleshootingpressing the SHIFT key on the screen 5.1. Transportation Chapter 5 Notes on Handling5.2. DVD-ROM/CD-ROM 5.3. Digital Audio TapeFigure 5-1 Cleaning Locations 5.4. Cleaning5.5. Notes on Installation Memo Notes on Handling