NEC NX7700i, 5020M-16 operation manual Base Module, This command is currently not supported

Base Module

cmd	arg1	arg2	arg3	arg4	Description
	pcibx	-	-	-	Connect PCI Bays to the partitions to which
					they belong.
					x: Physical PCI Bay number (0-7)
					This command is supported on the 32Way(B)
					model.
offline	-	-	-	-	This command is currently not supported.
					This command can be used to dynamically
					disconnect currently online components
					(CELL, XBX Card, and PCI Bay) from the
					system while the OS is running.
					If this command attempts to disrupt the
					current system operation, it will be rejected.
					This command remains invalid while any of
					the partitions within the system is booting up,
					shutting down, or handling an error.
					The CELL and PCI Bay are functional only if
					they are used in conjunction with the OS that
					supports this command.
					If no argument is specified or an argument
					has an error, the offline command help
					opens.
					This command is supported on the
					32Way(B), 8Way, and ISPF models. It is not
					supported on the 32Way(H) model.
	cellx	-	-	-	Disconnect the CELL Cards from the system
					and shut off their power. The CELL that
					controls the Compatibility PCI is unable to be
					disconnected.
					The ISPF is not the target of this command.
	xbxcx	-	-	-	Disconnect the XBX Cards from the system.
					On the 32Way(B) model, they must always
					be disconnected in pairs: i.e. XBX Cards 0
					and 2 or 1 and 3. It is not allowed to
					disconnect a single XBX Card alone.
					The XBX Cards are unable to be
					disconnected on the 8Way model.
	xbxc0	portx			Disconnect the inter-XBX external interface
					that connects cabinets.
					x: XBX port number (4-5)
					This command is supported on the ISPF
					System on which the OS is running (ACPI S0
					State).
	pcibx	-	-	-	Disconnect the PCI Bay from the system and
					shut off its power. It is not allowed to
					disconnect the PCI Bay that contains the
					Compatibility PCI.
					This command is supported on the 32Way(B)
					model.

led

-

-

-

-

Use this command to turn on/off the LEDs used for device location checkout.

If no argument is specified or an argument has an error, the led command help opens. This command is always valid to the CLK, XBX, and CELL Cards along with the PCI Bay regardless of the current system state. It is valid to the PCI slot only if the host GXB or PXH is online.

855-900549 2-54