NEC 5020M-16, NX7700i operation manual Table. Base Module Specifications

NX7700i/5020M-16 System Overview

Table. Base Module Specifications

BASE MODULE

Cell (Max. 2 cells can be installed in the base module.)

	CPU
		Max. No. of processors	8 (Max. 4 processors/cell)
	Main memory
		Expansion unit	2GB/4GB/8GB
		Main memory capacity	2GB to 128GB
I/O module (Max. 2 modules can be installed.)
	Max. No. of PCI slots		16 slots (133MHz)
	Max. I/O bandwidth		67GB/s
	DVD-ROM unit		One unit can be installed in the I/O module.
			DVD-ROM/CD-ROM mode
	DAT unit		One unit can be installed in the I/O module.
			DDS-4 4mm DAT unit
			Max. 4 units can be installed in the I/O module (2 units when
	Magnetic disk unit		DAT is installed).
			Selection from 73GB/146GB/300GB

POWER BAY (One unit can be installed in the base module.)

DPS (Max. 3 units can be installed.)

Note) Components are installed in the cabinet in units of the base module (an expansion power bay will be mounted depending on the form of power supply). A maximum of four base modules can be installed in a cabinet.

The expansion power bay is mounted under the base module when power is supplied from two systems or 100VAC. It depends on the form of power supply.

855-900549 1-4