Manuals / NEC / Computer Equipment / Server

NEC NX7700i, 5020M-16 operation manual EFI Devices

Models: 5020M-16 NX7700i

1 149

Download 149 pages 48.62 Kb

Page 129

Operation Procedure

3.5.6.EFI Devices

The device connected to the system is managed as “EFI device path.” This section explains the EFI device path.

1)DVD-ROM device

When the DVD-ROM drive is connected to the IDE secondary channel: Acpi(PNPA03,0)/Pci(21)/Ata(Secondary,Master)

2)SCSI device Acpi(PNP0A03,1)/Pci(20)/xxx/xxx/Scsi(Pun0,Lun0)/HD(Part1,SigFF050000)

Description:

SCSI(Puny,Lunz): Mounting location of the SCSI device (DISK) connected to the SCSI card.

y:Physical location of the SCSI device

z:Identifier for a logical unit when an SCSI device has multiple accessible logical units (“0”: Origin)

HD(Part1,SigFF050000): SCSI DISK drive information

Part1: Information on partition 1

SigFF050000: The signature is “FF050000.”

Device path (former part of SCSIxxx):

Example: To install the boot device in the PCI bay (core module):

Host Bus Slot

-------------------------------------------------------

Acpi(PNP0A03,?)/Pci(??)

	^UID
	^^^Slot Dev#/Func#

Location in PCI bay	Device path description on the EFI Menu
C_PCI01	Acpi(PNP0A03,x)/Pci(3z)
C_PCI02	Acpi(PNP0A03,x)/Pci(2z)

-------------------------------------------------------

x = UID: PCI module number identifier

855-900549

3-20

Image 129

NEC NX7700i, 5020M-16 operation manual EFI Devices

Contents

NEC Corporation 855-900549-A Rev NX7700i/5020M-16 Operation Manualused NEC DisposingIn the European Union Outside the EuropeanSafety Precautions Do not touch the internal components of the equipment Handling of the lithium batteryDo not insert foreign materials into the equipment Failure processingHandling of the laser product Disposing/collecting/recycling the equipment18kg Conductors only ATTENTIONNutilisez que les conducteurs de cuivre CAUTIONUse CopperATTENTIONMACHINE a FORT COURANT de FUITE 矢印を上に向けて取り付けること。注※意：カバーを開ける前に入力電源分電盤切断のこと。 CAUTIONDisconnect input power before removing this coverATTENTIONCouper lalimentation electrique avant de demonter ce capot 注※意：保守時は安定板を引き出すこと。警告 WARNING 保守者の方へ保守者の方へ警告 WARNINGMARKINGS 243-304367-GRP243-306629-GRP MARKINGSRev. 1, May PrefaceCleaning Schedule ContentsPreventing Accidental Erasure of Data Life of Data Cartridge Tape for the DAT UnitDigital Audio Tape System StartupFigure. External Views of the Cabinet Chapter 1 NX7700i/5020M-16 System Overview1.1. Configuration and Specifications of the Base Module Figure. Layout of Parts in the Base Module POWER BAYNX7700i/5020M-16 System Overview I/O MODULETable. Base Module Specifications NX7700i/5020M-16 System Overview Table. Base Module Specifications Cont’dMain Cabinet 545Kg1.2.1. Adding Processors 1.2. Expandability1.2.2. Expanding Memory Capacity 1.2.3. Adding CellsFigure. System Configuration Itanium2NX7700i/5020M-16 System Overview Base Module ChapterFigure. Doors of Cabinet Base ModuleFigure. Image of Partitions 2.1. Partition FunctionBASE MODULE 2.2. Name and Function of Components 2.2.1. Cabinet Primary CabinetBASE MODULE POWBAY#12.2.2 Base Module 2.2.3 Expansion Power Bay2.2.4 Cell 2.2.5. I/O Module2.2.6. Power Bay 2.2.7. iSP Figure. Rear panel of iSP Installed in the Base ModuleBase Module 2.2.8. DVD-ROM Unit 2.2.8.1. Loading and Unloading MediaFigure. Loading and Unloading DVD-ROM/CD-ROM 2.2.9.1. Location of Index Labels 2.2.9. DAT Unit2.2.9.2. Notes on Index Labels 2.2.9.3. Preventing Accidental Erasure of Data2.2.9.5. Cleaning Schedule 2.2.9.4. Cleaning the DAT Unit2.2.9.6. Cleaning Medium for the DAT Unit 2.2.9.7. Life of Data Cartridge Tape for the DAT Unit2.2.9.9. Notes on the DAT Unit 2.2.9.10. Loading and Unloading Digital Audio TapesFigure. DAT Units 2.2.10. Notes on Installing the UPS AC SW P1Figure. Jumper Connector for Installing the UPS CB1 P3 AC SWAC SW AC SWLED CARD 2.2.11. System LEDs2.3.1. SP Console 2.3. ConsolesBase Module Figure. Console Connection Diagram2.4.1. Console Connection and Login 2.4. Service Processor SP2.4.1.2. Accessible Console Functions 2.4.1.1. Type of Console Connections2.4.1.3. Console Status and Login Authentication Login password required Serial console inoperative Press ESC Choose Exit iSP login promptCM command Password required2.4.1.4. Login and Main Menu Screen Example…BOOT FW The “backup” indicator will not appear if no backup SP existsiSP BOOT MAIN MENU S iSP commands E Exit Description2.4.2. Note Possible Events including operator entries and System ResponsesBase Module CTRL+B 2.4.3. OS BIOS ConsoleDescription Possible Events including operator entries and System ResponsesBase Module Virtual System Operator Panel 2.4.4. Virtual SOPDescription Possible Events including operator entries and System ResponsesBase Module Base Module 2.4.4.1. Details of Partition Status DisplayOSBIOS serial console of partition#0 INITIALIZING 2.4.5. SP Command ConsoleBase Module CTRL+B2.4.5.1. SP Command Console Buffer 2.4.5.2. SP Command Prompt2.4.5.3. SP Message Header The following tables contain SP command lists by category 2.4.5.4. SP Command ListSystem Control Base ModuleFigure. System Status Transitions and System Control Commands Normal mode other commands ConfigurationSettings Base Module2.4.6. SP Command Reference 2.4.6.1. DF Shut down System Power override FunctionBase Module Base Module DescriptionFunction 2.4.6.2. DN Shut down System PowerDP command was accepted. Dump button interrupt will be generated soon 2.4.6.3. DP System DumpFunction Base ModuleAlways valid without regard to the current system status 2.4.6.4. DT SP Data and TimeFunction Base Module32Way For one or two AC power receiving systems 2.4.6.5. EN Environmental InformationISPF does not have two AC power receiving systems Always valid without regard to the current system statusc d e f Base Module2-39 The following information will be missing for 8WayBase Module 2-41 Base ModuleThe numbers of PCI Bay cards are changed on 32Way/8Way and ISPF Base Moduletentative tentativeBase Module DescriptionAlways valid without regard to the current system status 2.4.6.6. FV Firmware VersionsFunction iSPyz--- fv ENTERFunction 2.4.6.7. HC Hardware ConfigurationBase Module Base Module Base Module This command is currently not supportedBase Module arg1 Base ModuleBase Module Base Module Base Module This command is currently not supportedarg1 arg2Base Module This command is currently not supportedBase Module Base Module Base Module Description of Status Indicator StringsBase Module iSPyz--- hc ENTERHC helpENTER b c d e Base Module2-59 The SM size is shown for the ISPF1 LIN=x,y,z x Logical IOX number Base Modulez “S” if SCSI SPLIT Mode is selected, and “N” if it is deselected For 32WayHBase Module For 32WayBFor 8Way For ISPF Base ModuleFor 32WayB, 8Way, or ISPF MMXx2 and MMXx3 are only shown for 32WayB2-63 Base ModuleTAG0e Base ModuleTAG0o CELL1Base Module j j j2-65 3 Listed for the PCI Bay in which the Core Cards are installed 2 Listed for the PCI Bay in which the Core Cards are installedBase Module For 32Way, subsequently listed to the max. XBX Card number2-67 Base ModuleBase Module POWBAYs Main cabinetPOWBAYs Expansion cabinet For the ISPF, Power Bay1 for dual AC systems is not configured For the 8Way/ISPF model, there are three DPSs in Power BayBase Module 2-69Base Module DescriptionAlways valid without regard to the current system status 2.4.6.8. HE HelpFunction Base ModuleAlways valid without regard to the current system status 2.4.6.9. ML Message LogFunction Base ModuleBase Module DescriptioniSP0mINFO.2129 partition 0 handed off the control to BIOS 2.4.6.10. PC Power CycleFunction pcENTERFunction 2.4.6.11. RS Cold Reset SystemBase Module rsENTERSetting partition boot method and hot-plug permission 2.4.6.12. SG SP/System SettingAlways valid without regard to the current system status FunctionBase Module ISPFLAN/Serial SP default FTP Server Configuration SP SNMP ConfigurationBase Module Description Base ModulesgENTER bENTER2ENTER Base ModuleENTER onENTERBase Module DescriptionBase Module Base Module DescriptionBase Module DescriptionManager1 LAN0 IP Base ModuleBase Module DescriptionFunction 2.4.6.13. SR Save System CMOS/NvRAMBase Module file path cmossave/cmos1.bin ENTERDescription DescriptionDescription No Function 2.4.6.14. UB Bring up BIOSBase Module mm/dd/yyyy HHMMSS 0------- System initialization started. SPFWRxx.xxThis command is valid to inactive partitions DC Off 2.4.6.15. UP Bring up SystemFunction Base Module3.1. System Startup 3.1.1. System Startup Procedure Chapter 3 Operation ProcedureSee step 3 in next page Expansion power bay/Base module AC ON Operation ProcedureSee steps 7 to 11 in next page OS Boot StartRemark Operation Procedure Operation Procedure 3.1.2. SP Console Messages2 Example of SP console screen during system startup Operation ProcedureOperation Procedure 3.2. System Shutdown 3.2.1. System Shutdown ProcedureSee step 6 in next page Turn off AC to expansion power bay/base Operation ProcedureStart Shut down OS See step 1 in next page Turn off console PC module See steps 7 and 8 in next page Turn off peripheralsSee 2.2.1 Cabinet for the location of the switch panel. See 2.2.6 Power Bay for the location of the AC switch on the base module and expansion power bay. The number of switches on the switch panel depends on the number of installed base modules and expansion power bays. Take care of the association between these switches and base modules and expansion power bays during switch operation. The switches on the switch panel are used for immediate power shutdown for emergency purposes. When a switch on this panel is turned off, data may be destroyed Operation Procedure 3.2.2. SP Console Messages1 Example of DC power off display on SP console screen 3-103.4. AC-LINK Auto Control 3.3. Emergency System Shutdown with AC SWData may be destroyed when the AC switch is turned off during Provide criteria for operating the AC switch and use the switch1 SP console screen and operation during AC LINK setup Operation Procedure= Enable AC LINK and press 3-123.5.1. OS Boot with Boot Manager Before Installing the OS 3.5. OS BootUse the arrow keys to change settings Use the OS console to operate the EFI Shell. Inputs from the„ Image of the OS Boot screen displayed by the EFI Boot Manager Use the arrow keys to change settingsSLES9 3.5.4. EFI Shell Commands 3.5.3. EFI ShellEFI Shell Commands Operation Procedure CommandDescription Operation Procedure CommandDescription 3.5.5. OS Boot from EFI Shell Boot the OS loader Operation Procedurefs0¥ cd os fs0¥os ls3.5.6. EFI Devices Computing UID Example 3.5.7. EFI Boot Option Maintenance Operation Procedure Boot Maintenance Menu OptionsOption Description3.5.7.1. Boot from a File „ Image of the Boot from a File screenOperation Procedure 3.5.7.2. Add a Boot Option ディレクトリを選択して実行プログ登録できま 3.5.7.4. Change Boot Order 3.5.7.3. Add Boot Options3.5.7.5. Manage BootNext Setting 3.5.7.6. Set Auto Boot Timeout AcpiPNP0A03,0/Pci30/Mac00004C717743 3.5.7.7. Setting the Network BootChanging procedure 1 Activate the EFI Boot Manager 3.5.7.8. Changing BIOS Settings EFI System Configuration Menu Processor Configuration 3.6. System Dump 4.1. Troubleshooting Chapter 4 Troubleshootingpressing the SHIFT key on the screen 5.1. Transportation Chapter 5 Notes on Handling5.2. DVD-ROM/CD-ROM 5.3. Digital Audio TapeFigure 5-1 Cleaning Locations 5.4. Cleaning5.5. Notes on Installation Memo Notes on Handling