NEC NX7700i, 5020M-16 operation manual DAT Unit, Location of Index Labels, Notes on Index Labels

Base Module

2.2.9.DAT Unit

An optional DAT unit can be installed in the I/O module.

2.2.9.1.Location of Index Labels

The figure below shows the location of index labels attached to the digital audio tape.

NEC

Figure. Index Labels on the Digital Audio Tape

2.2.9.2.Notes on Index Labels

(1)Attach index labels properly as shown in 2.2.9.1. Be sure to write the start date on these labels.

(2)Change the labels when the DAT is used for other purpose. Remove the old labels before attaching the new labels.

(3)When using index labels other than those supplied by NEC, make sure that they are in the right size and easy to remove without remnant paste.

2.2.9.3.Preventing Accidental Erasure of Data

Open the write protect slider next to the side label of the cartridge to prevent data on the DAT from being erased by accident. Write on the DAT is permitted by closing the write protect slider.

Figure. Preventing Accidental Erasure of Data on DAT (Write Protect)

855-900549 2-8