NEC 5020M-16, NX7700i Base Module, arg1, arg2, This command is currently not supported

					Base Module
cmd	arg1	arg2	arg3	arg4	Description
disable	-	-	-	-	Use this command to manually “DISABLE”
					the components that are currently enabled.
					If no argument is specified or an argument
					has an error, the disable command help
					opens.
					Online components are unable to be
					disabled.
					It is not allowed to disable the CELL Card,
					XBX Card, PCI Bay, and their
					subcomponents when any of the partitions
					within the system is booting up, shutting
					down, or handling an error.
	<arg1>	<arg2>	-	-	<arg1> and <arg2> are the same as those
					for the enable command.
					Argument “all” is not allowed for this
					command.
online	-	-	-	-	This command is currently not supported.
					This command can be used to dynamically
					connect currently offline components (CELL,
					XBX Card, and PCI Bay) to the system while
					the OS is running. It remains invalid while
					any of the partitions within the system is
					booting up, shutting down, or handling an
					error.
					The CELL and PCI Bay are functional only if
					they are used in online conjunction with the
					OS that supports this command function.
					If no argument is specified or an argument
					has an error, the online command help
					opens.
					This command is supported on the
					32Way(B), 8Way, and ISPF models. It is not
					supported on the 32Way(H) model.
	cellx	-	-	-	Connect CELL Cards to the partition to which
					they belong.
					A vacant partition to which no CELL or IOX
					belongs is needed.
					This command is supported on the 32Way(B)
					and 8Way models.
	xbxcx	-	-	-	Connect XBX Cards to the system.
					On the 32Way(B) model, XBX Cards need
					be connected to the system in pairs: i.e. XBX
					Cards 0 and 2 or 1 and 3. A single XBX Card
					alone is not accepted.
					The XBX Card is not connectable to the
					8Way model.
	xbxc0	portx			Connect inter-XBX external interface ports to
					the system, to which cabinets are connected.
					x: XBX port number (4-5)
					This command is supported on the ISPF
					system. It is valid when the operating
					systems are running (ACPI S0 State) on both
					systems.

2-53 855-900549