NEC NX7700i Notes on the DAT Unit, Loading and Unloading Digital Audio Tapes, Figure. DAT Units

Base Module

2.2.9.9.Notes on the DAT Unit

Avoid placing the DAT unit in the following locations as much as possible to prevent trouble in the DAT unit:

•Near the printer (to prevent toner or paper powder dusts)

•By the window or near the passage way (to prevent soil dusts)

•On the carpet (to prevent dust generation)

2.2.9.10.Loading and Unloading Digital Audio Tapes

How to load and unload a digital audio tape is explained below.

(1)Loading a digital audio tape

1)Remove the front filter cover of the I/O enclosure (loosen the hand screw).

2)Hold the DAT lengthwise with the DAT label oriented to the left, and insert it into the drive vertically and slowly.

3)Keep pushing the tape slowly until you feel it touching the stopper inside the drive and being locked in the drive. When the tape is locked, a clicking sound is heard.

(2)Unloading a digital audio tape

1)Be sure that the DAT drive access indicator LED (green) goes off.

2)Push the Eject button at the lower part of the DAT unit lightly.

3)The DAT slides out from the drive.

4)Take out the DAT from the drive vertically and slowly.

DAT units

Figure. DAT Units

855-900549 2-10