NEC NX7700i, 5020M-16 operation manual Base Module, arg1

Base Module

cmd	arg1	arg2	arg3	arg4	Description
	memdx	-	-	-	This command is only valid to the 32Way
					model.
					Use it to add MMX (2-3) and ROW to the
					memory daughter card. The DIMM capacity
					is automatically read when it is being
					initialized.
					x is the physical number of the CELL Card
					(0-7).
	pcibx	de	[core]	-	Add PCI Bays.
					x is a DGI/I2C port number on the iSP side
					(0-7).
					Use arg2 to specify the type of the PCI Bay
					(mandatory). Specify “d” for PCID-Bays, and
					“e” for PCIE-Bays.
					Specify “core” for arg3 if Core Cards (GXB)
					are installed.
					If the type of the PCI Bay (PCID/PCIE) or the
					presence of the Core Card has been
					changed, the SP will know that change from
					the revision information for that PCI Bay.
delete	-	-	-	-	Use this command to delete components
					from iSP management. If physically removed
					components are left under iSP management,
					they will be handled as an “INVISIBLE” error
					indefinitely.
					If no argument is specified or an argument
					has an error, the delete command help
					opens.
					Components in DC-ON state are unable to
					be deleted (with the exception of the CLK
					and DPS).
					The CELL Card, XBX Card, PCI Bay, or their
					subcomponents is unable to be deleted if
					any of the partitions within the system is
					booting up, shutting down, or handling an
					error.
	<arg1>	-	-	-	<arg1> is identical to that for the add
					command.
enable	-	-	-	-	Use this command to enable the
					components that are currently “DISABLED.”
					If no argument is specified or an argument
					has an error, the enable command help
					opens.
					This command is valid only if the partition to
					which the pertinent components belong is
					not active.
					The CELL Card, XBX Card, PCIX, and their
					subcomponents can be enabled unless any
					of the partitions within the system is booting
					up, shutting down, or handling an error.
					The Power Bay can be enabled only if none
					of the partitions within the system is active.

855-900549 2-50