NEC 5020M-16, NX7700i operation manual Operation Procedure, System Startup System Startup Procedure

Operation Procedure

Chapter 3 Operation Procedure

3.1.System Startup

3.1.1.System Startup Procedure

When all installation is completed, the system can be started by following the system startup procedure. The procedure to turn on the AC power with the AC switch is explained in this section. When a UPS is connected, turn on the AC power from the UPS. Refer to the UPS manual for the AC power-on procedure. The system startup flowchart is shown in the next page.

CAUTION

Be sure that all inputs and outputs have been installed and upgraded.

3-1 855-900549