Installing the Cisco ONS 15600 OC192/STM64 LR/LH 4 Port 1550 Card
Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
Product Name:
This document contains a description of OC192/STM64 LR/LH 4 Port 1550 card features, installation procedures, removal instructions, and technical specifications. Use this document in conjunction with the Cisco ONS 15600 Reference Manual, the Cisco ONS 15600 Procedure Guide, and the Cisco ONS 15600 Troubleshooting Guide when working with OC192/STM64 LR/LH 4 Port 1550 cards.
This document contains the following sections:
•“OC192/STM64 LR/LH 4 Port 1550 Card” section on page 2
•“OC192/STM64 LR/LH 4 Port 1550 Card Features and Functions” section on page 2
•“Replace an OC-192 Card” section on page 8
•“Obtaining Documentation” section on page 12
•“Obtaining Technical Assistance” section on page 14
This document contains the following procedures:
“Replace an OC-192 Card” procedure on page 8
Note For information about circuits and card capacities, see the Cisco ONS 15600 Reference Manual.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA
Copyright ©
