NEC NX7700i UP Bring up System, This command is valid to inactive partitions DC Off, Function

Base Module

2.4.6.15. UP (Bring up System)

m	b	u
X

* This command is valid to inactive partitions (DC Off).

Function:

This command is used to turn the system DC power On, initialize the hardware, and boot up the BIOS. Whether to subsequently boot the OS depends on the BIOS/EFI settings.

(Screen Example)

	Description
	No.
iSPyz:---> up<ENTER>
This command will bring up the specified partition.
Enter partition number (0-7/all/CR=exit) : all<ENTER>	(a)
Execute OK? (y/[n]) y<ENTER>	(b)
UP command was accepted. All partitions will run soon.	(c)
mm/dd/yyyy HH:MM:SS 0------- System initialization started. (SPFW:Rxx.xx)
[iSP0m:INFO.2094] partition 0 : turning on POWBAY(s)...
:	(d)
mm/dd/yyyy HH:MM:SS 0------- System initialization completed. (SPFW:Rxx.xx)
[iSP0m:INFO.2129] partition 0 : handed off the control to BIOS.
(DIPSW = 00000000)

(Description)
Description	Description
No.

(a)Enter partition number.

If “all” is specified, all the existing partitions are the target of this command. A confirmation message appears.

If you are sure to continue, enter “y.”

If the first 1 byte of the BIOS virtual DIPSW is not zero, the following confirmation

(b)message will appear:

Partition x BIOS virtual DIPSW is ON.(DIPSW=xxyyyyyy) Continue? ([y]/n)

If you are sure to continue the boot process, enter “y.” If you wish to abort, enter “n.”

(c)A “UP command accepted” message appears. The actual boot is performed in the background.

(d)Shows boot progress in the background.

End of SEC2

855-900549 2-90