NEC 5020M-16, NX7700i operation manual Base Module

						Base Module
cmd	arg1		arg2	arg3	arg4	Description
	cellx	n		m	-	Attach the CELL Card having physical CELL
						number x to partition number n, using logical
						CELL number m (which is visible to the
						software or BIOS).
						This command may also be used to change
						a logical CELL number for an already
						attached CELL.
						A logical CELL number must be unique to
						every 8 CELL Cards.
						The logical CELL number of an online CELL
						Card is unable to be altered.
	ioxx	n		m	[ps]	Attach the IOX Card having physical IOX
						number x to partition number n, using logical
						IOX number m (which is visible to the
						software or BIOS).
						Specify p for arg4 if the PCI Bay with BIO is
						to use that BIO. Specify s for arg4 if the PCI
						Bay having duplicated BIOs is to use the
						secondary BIO.
						This command may also be used to change
						a logical IOX number for an already attached
						IOX.
						A logical IOX number must be unique within
						a partition.
						The logical IOX number of an online IOX
						Card cannot be altered.
detach	-	-		-	-	Use this command to detach partition
						numbers from CELL or IOX Cards.
						If no argument is specified or an argument
						has an error, the detach command help
						opens.
						Online components are unable to be
						detached.
						It is not allowed to detach components either
						when the partition is booting up, shutting
						down, or handing an error.
	cellx	-		-	-	Detach the CELL Card with physical CELL
						number x from the partition to which it is
						currently attached.
	ioxx	-		-	-	Detach the IOX Card with physical IOX
						number x from the partition to which it is
						currently attached.
	partx	-		-	-	Detach all the CELL and IOX Cards from the
						partitions to which they are currently
						attached.
						x: Partition number

2-47 855-900549