Radio Mode Display
lights while receiving an FM stereo signal. | Display change | |||||
| Frequency | Band Preset Number | ||||
| Press [DISP] (Display) to change the display. | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Radio mode display (Default)
Clock display
lights while receiving the D•M (Direct Memory) station.
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 | Manual station preset | |
respectively. | ||
|
Station Preset
Preset stations can be simply called up by pressing one of the preset buttons from [1] to [6].
Auto Preset Memory (APM)
With this operation, stations with good receiving conditions can be automatically stored in the preset memory.
1 Select a band.
2 Hold down [BAND] (APM) for more than 2 seconds.
The preset stations under best receiving conditions are received for 5 seconds each after presetting the stations (SCAN). To stop scanning, press one of the preset but- tons from [1] to [6].
Note: New stations overwrite existing saved stations.
1 Tune into a station.
2 Hold down one of the preset buttons from
[1]to [6] for more than 2 seconds.
(blinks once)
Note: New stations overwrite existing saved stations.
Direct Memory
Your favorite FM/AM radio station can be memorized in the [D·M] button and you can call back the radio station just by pressing the button whatever the current sound source is, even if the power is off.
D•M station calling
1 Press [D•M] (Direct Memory). Press again to cancel.
D•M station writing
1 Select a station you would like to preset.
2 Hold down [D•M] for more than 2 seconds.
