Bosch Appliances Complete Guide to Bosch VideoJet X10 Configuration and Setup

VideoJet X10Configuration Using a Web Browser en 83

5.41 Advanced Mode: JPEG Posting

You can save individual JPEG images on an FTP server at specific intervals. You can then retrieve these images at a later date to reconstruct alarm events if required.

Image size

Select the resolution you wish the JPEG images to have:

–Small

176 × 144/120 pixels (QCIF)

–Medium

352 × 288/240 pixels (CIF)

–Large

704 × 576/480 pixels (4CIF)

File name

You can select how file names will be created for the individual images that are transmitted.

–Overwrite

The same file name is always used and any existing file will be overwritten with the current file.

–Increment

A number from 000 to 255 is added to the file name and automatically incremented by 1. When it reaches 255 it starts again from 000.

–Date/time suffix

The date and time are automatically added to the file name. When setting this parameter, ensure that the unit's date and time are always correctly set. Example: the file snap011005_114530.jpg was stored on October 1, 2005 at 11:45 and 30 seconds.

Posting interval

Enter the interval in seconds at which the images will be sent to an FTP server. Enter zero if you do not want any images to be sent.

FTP server IP address

Enter the IP address of the FTP server on which you wish to save the JPEG images.

FTP server login

Enter your login name for the FTP server.

FTP server password

Enter the password that gives you access to the FTP server.

Bosch Security Systems Installation and Operating Manual DOC V4.0 2009.06